- export library path for gmp/mpfr from CGAL config files.
This is required when non-system gmp/mpfr libraries are being
used, but not using a ThirdParty compiler installation.
- automatically handle lib/ vs lib64/ (eg, for central installations)
for packages such as boost, CGAL, etc. While the ThirdParty
compilation of these will normally land in lib64/, this may not be
the case when they are supplied by another means.
- reworked the handling of foamEtcFile and foamCleanPath for less
clutter in the configuration files.
Added the bin/tools/lib-dir script to handle logic that is
too complex to easily manage in csh.
- now avoid Istream and token mechanism in favour of a simpler string
parser. This makes the code clearer, smaller, robuster.
- provide convenience ge/gt/le/lt static constructors for scalarRange
for using bounds directly with specifying via a string parameter.
- scalarRange, scalarRanges now follow the unary predicate pattern
(using an operator() for testing). This allows their reuse in
other contexts. Eg, for filtering operations:
myHash.filterValues(scalarRange::ge(100));
- remove unused scalarRanges methods that were specific to handling
lists of time values. These were superseded by timeSelector methods
several versions ago.
- required if there is no system openmp and libomp or libgomp are
only found in the clang hierarchy
STYLE: add some notes in the openmp rules.
- the _OPENMP macro is now used in low-level testing files
- The -rotate-angle option allows convenient specification of a
rotation about an arbitrary axis. Eg, -rotate-angle '((1 1 1) 45)'
- The -origin option can be used to temporarily shift the origin
for the rotation operations. For example,
-origin '(0 0 1)' -rotate-angle '((1 0 0) 180)'
for mirroring.
- relocate WM_COMPILER_ARCH, WM_COMPILER_LIB_ARCH from
etc/{bashrc,cshrc} to etc/config.{csh,sh}/settings since these
should not be changed by the user anyhow.
- Use gcc/g++ as common base and specialize afterwards (to reduce
duplication)
- adjust format of WM_PROJECT_SITE fallback to allow for easier
automated edits
- unknown options or missing option values now emit a shorter message
without the entire usage. This makes it easier to identify the errors
and is better aligned with the behaviour of GNU system tools.
====
$ simpleFoam -case
Using: OpenFOAM-plus (see www.OpenFOAM.com)
Build: plus-01234
Error: option '-case' requires an argument
See 'simpleFoam -help' for usage
====
- provide for reduced (-help) and full (-help-full) usage information.
In many cases the reduced usage provided sufficient and easier
to find the information.
- make -srcDoc an alias for -doc-source
- no warnings about option aliases for future dates.
- this provides a better typesafe means of locating predefined cell
models than relying on strings. The lookup is now ptr() or ref()
directly. The lookup functions behave like on-demand singletons when
loading "etc/cellModels".
Functionality is now located entirely in cellModel but a forwarding
version of cellModeller is provided for API (but not ABI) compatibility
with older existing user code.
STYLE: use constexpr for cellMatcher constants
- Instead of relying on #inputMode to effect a global change it is now
possible (and recommended) to a temporary change in the inputMode
for the following entry.
#default : provide default value if entry is not already defined
#overwrite : silently remove a previously existing entry
#warn : warn about duplicate entries
#error : error if any duplicate entries occur
#merge : merge sub-dictionaries when possible (the default mode)
This is generally less cumbersome than the switching the global
inputMode. For example to provide a set of fallback values.
#includeIfPresent "user-files"
...
#default value uniform 10;
vs.
#includeIfPresent "user-files"
#inputMode protect
...
value uniform 10;
#inputMode merge // _Assuming_ we actually had this before
These directives can also be used to suppress the normal dictionary
merge semantics:
#overwrite dict { entry val; ... }
ENH: foamyHexMesh: Made default region volume type that of it's parent
Foamy surface conformation entries have a "meshableSide" entry which
controls which side of the surface is to be meshed. Typically this is
set "inside" for boundaries and "both" for baffles. A sub-region's
default entry is now taken from it's parent, rather than a specific
value (it was "inside"). This is consistent with how other entries are
handled.
surfaceConformation
{
locationInMesh (0 0 0);
geometryToConformTo
{
baffle
{
featureMethod extractFeatures;
includedAngle 120;
meshableSide both; // <-- per-surface setting
regions
{
disk
{
meshableSide both; // <-- per-region setting*
// *in this example, this entry is not needed, as it
// is taken from the per-surface setting above
}
}
}
// ...
}
}
ENH: foamyHexMesh: Added (reinstated) baffle patches
A patch can now be assigned to a baffle surface. This assignment will
take precedence over any face-zones.
surfaceConformation
{
locationInMesh (0 0 0);
geometryToConformTo
{
disk
{
featureMethod extractFeatures;
includedAngle 120;
meshableSide both; // <-- baffle
patchInfo
{
type wall;
inGroups (walls);
}
}
// ...
}
}
STYLE: foamyHexMesh: Switched off output of all the secondary meshes
- this compact form shows the subscription per host in the unsorted
mpi order
nProcs : 18
Hosts :
(
(node1 6)
(node2 8)
(node3 4)
)
This provides a succinct overview of which hosts have been
subscribed or oversubscribed.
- The longer list of "slave.pid" ... remains available on the
InfoSwitch 'writeHosts'
old "positions" file form
The change to barycentric-based tracking changed the contents of the
cloud "positions" file to a new format comprising the barycentric
co-ordinates and other cell position-based info. This broke
backwards compatibility, providing no option to restart old cases
(v1706 and earlier), and caused difficulties for dependent code, e.g.
for post-processing utilities that could only infer the contents only
after reading.
The barycentric position info is now written to a file called
"coordinates" with provision to restart old cases for which only the
"positions" file is available. Related utilities, e.g. for parallel
running and data conversion have been updated to be able to support both
file types.
To write the "positions" file by default, use set the following option
in the InfoSwitches section of the controlDict:
writeLagrangianPositions 1;
"pos" now returns 1 if the argument is greater than 0, otherwise it returns 0.
This is consistent with the common mathematical definition of the "pos" function:
https://en.wikipedia.org/wiki/Sign_(mathematics)
However the previous implementation in which 1 was also returned for a 0
argument is useful in many situations so the "pos0" has been added which returns
1 if the argument is greater or equal to 0. Additionally the "neg0" has been
added which returns 1 if if the argument is less than or equal to 0.
Original commit message:
------------------------
Parallel IO: New collated file format
When an OpenFOAM simulation runs in parallel, the data for decomposed fields and
mesh(es) has historically been stored in multiple files within separate
directories for each processor. Processor directories are named 'processorN',
where N is the processor number.
This commit introduces an alternative "collated" file format where the data for
each decomposed field (and mesh) is collated into a single file, which is
written and read on the master processor. The files are stored in a single
directory named 'processors'.
The new format produces significantly fewer files - one per field, instead of N
per field. For large parallel cases, this avoids the restriction on the number
of open files imposed by the operating system limits.
The file writing can be threaded allowing the simulation to continue running
while the data is being written to file. NFS (Network File System) is not
needed when using the the collated format and additionally, there is an option
to run without NFS with the original uncollated approach, known as
"masterUncollated".
The controls for the file handling are in the OptimisationSwitches of
etc/controlDict:
OptimisationSwitches
{
...
//- Parallel IO file handler
// uncollated (default), collated or masterUncollated
fileHandler uncollated;
//- collated: thread buffer size for queued file writes.
// If set to 0 or not sufficient for the file size threading is not used.
// Default: 2e9
maxThreadFileBufferSize 2e9;
//- masterUncollated: non-blocking buffer size.
// If the file exceeds this buffer size scheduled transfer is used.
// Default: 2e9
maxMasterFileBufferSize 2e9;
}
When using the collated file handling, memory is allocated for the data in the
thread. maxThreadFileBufferSize sets the maximum size of memory in bytes that
is allocated. If the data exceeds this size, the write does not use threading.
When using the masterUncollated file handling, non-blocking MPI communication
requires a sufficiently large memory buffer on the master node.
maxMasterFileBufferSize sets the maximum size in bytes of the buffer. If the
data exceeds this size, the system uses scheduled communication.
The installation defaults for the fileHandler choice, maxThreadFileBufferSize
and maxMasterFileBufferSize (set in etc/controlDict) can be over-ridden within
the case controlDict file, like other parameters. Additionally the fileHandler
can be set by:
- the "-fileHandler" command line argument;
- a FOAM_FILEHANDLER environment variable.
A foamFormatConvert utility allows users to convert files between the collated
and uncollated formats, e.g.
mpirun -np 2 foamFormatConvert -parallel -fileHandler uncollated
An example case demonstrating the file handling methods is provided in:
$FOAM_TUTORIALS/IO/fileHandling
The work was undertaken by Mattijs Janssens, in collaboration with Henry Weller.
terms of the local barycentric coordinates of the current tetrahedron,
rather than the global coordinate system.
Barycentric tracking works on any mesh, irrespective of mesh quality.
Particles do not get "lost", and tracking does not require ad-hoc
"corrections" or "rescues" to function robustly, because the calculation
of particle-face intersections is unambiguous and reproducible, even at
small angles of incidence.
Each particle position is defined by topology (i.e. the decomposed tet
cell it is in) and geometry (i.e. where it is in the cell). No search
operations are needed on restart or reconstruct, unlike when particle
positions are stored in the global coordinate system.
The particle positions file now contains particles' local coordinates
and topology, rather than the global coordinates and cell. This change
to the output format is not backwards compatible. Existing cases with
Lagrangian data will not restart, but they will still run from time
zero without any modification. This change was necessary in order to
guarantee that the loaded particle is valid, and therefore
fundamentally prevent "loss" and "search-failure" type bugs (e.g.,
2517, 2442, 2286, 1836, 1461, 1341, 1097).
The tracking functions have also been converted to function in terms
of displacement, rather than end position. This helps remove floating
point error issues, particularly towards the end of a tracking step.
Wall bounded streamlines have been removed. The implementation proved
incompatible with the new tracking algorithm. ParaView has a surface
LIC plugin which provides equivalent, or better, functionality.
Additionally, bug report <https://bugs.openfoam.org/view.php?id=2517>
is resolved by this change.
- this reduces the number of functions and allows lazy loading of
completion options, which makes it easy to quickly add any other
OpenFOAM application in completion.
The generic '_of_complete_' function handles (bash) completion for
any OpenFOAM application. On the first call for any particular
application, it retrieves the available options from the application
help output and adds this information to its environmental cache for
subsequent use.
- Tcsh completion uses the same function via a bash wrapper.
But since its wrapper is transient, the on-the-fly generation would
be less efficient. For this case, a pre-generated completion_cache
can be used, which is generated with
bin/tools/foamCreateCompletionCache
- handles the case where we are currently completing something that
does not appear to be an option. For example,
foamDictionary -expanded someD[TAB]
should complete the filename, not present more options.
- although this has been supported for many years, the tutorials
continued to use "convertToMeters" entry, which is specific to blockMesh.
The "scale" is more consistent with other dictionaries.
ENH:
- ignore "scale 0;" (treat as no scaling) for blockMeshDict,
consistent with use elsewhere.
- currently no cleanup of completions when deactivating an OpenFOAM
tcsh environment
- tab completion with directories adds a space after the slash, which
makes navigation a bit annoying.
- use complete -o filenames, dropped -o nospace to make it more responsive.
- restructure completion code to use a unified backend, which makes it easier
understand, maintain and re-use.
- foamCreateBashCompletions now simply outputs to a stdout, and allows
quick generation of completion of single applications.
- add -fileHandler completion in anticipation of future changes there.
- relocated as etc/config.s/bash_completion to prevent inadvertently
having two versions (.com, .org) installed at the same time.
- added an explicit print, but only report profiling to the log
file from master process.
We don't wish to overwrite any profiling that was conducted during
the simulation. Besides which, we don't have a proper Time object
for handling the write nicely either.
- add note in BuildIssues about the I_MPI_CC variable, which is needed
when building with Intel-MPI and gcc/clang.
This additional setting is needed since the changes needed to solve
the issue of building scotch with Intel-MPI and icc (issue #434)
means that mpiicc is now being used as the wrapper when compiling
scotch.
- have the FOAM_MPI short name for INTELMPI start with 'impi-' instead
of just the version number.
Intel-MPI is often installed as /opt/intel/impi/4.1.3.049, which
results in 'FOAM_MPI=4.1.3.049' and the mpi flavour is lost.
Prefix these cases with 'impi-'
- allows configuration without an environment variable.
For compatibility still respect FOAM_SIGFPE and FOAM_SETNAN
env-variables
- The env-variables are now treated as true/false switch values.
Previously there was just a check for env exists or not, but this
can be fairly fragile for a user's environment.
Adds overset discretisation to selected physics:
- diffusion : overLaplacianDyMFoam
- incompressible steady : overSimpleFoam
- incompressible transient : overPimpleDyMFoam
- compressible transient: overRhoPimpleDyMFoam
- two-phase VOF: overInterDyMFoam
The overset method chosen is a parallel, fully implicit implementation
whereby the interpolation (from donor to acceptor) is inserted as an
adapted discretisation on the donor cells, such that the resulting matrix
can be solved using the standard linear solvers.
Above solvers come with a set of tutorials, showing how to create and set-up
simple simulations from scratch.
Some versions of lsof print the mount point (if remote) after the
script path:
/hosts/mymachine/OpenFOAM/OpenFOAM-plus.develop/etc/cshrc (mymachine:/home)
This now gets filtered out.
except turbulence and lagrangian which will also be updated shortly.
For example in the nonNewtonianIcoFoam offsetCylinder tutorial the viscosity
model coefficients may be specified in the corresponding "<type>Coeffs"
sub-dictionary:
transportModel CrossPowerLaw;
CrossPowerLawCoeffs
{
nu0 [0 2 -1 0 0 0 0] 0.01;
nuInf [0 2 -1 0 0 0 0] 10;
m [0 0 1 0 0 0 0] 0.4;
n [0 0 0 0 0 0 0] 3;
}
BirdCarreauCoeffs
{
nu0 [0 2 -1 0 0 0 0] 1e-06;
nuInf [0 2 -1 0 0 0 0] 1e-06;
k [0 0 1 0 0 0 0] 0;
n [0 0 0 0 0 0 0] 1;
}
which allows a quick change between models, or using the simpler
transportModel CrossPowerLaw;
nu0 [0 2 -1 0 0 0 0] 0.01;
nuInf [0 2 -1 0 0 0 0] 10;
m [0 0 1 0 0 0 0] 0.4;
n [0 0 0 0 0 0 0] 3;
if quick switching between models is not required.
To support this more convenient parameter specification the inconsistent
specification of seedSampleSet in the streamLine and wallBoundedStreamLine
functionObjects had to be corrected from
// Seeding method.
seedSampleSet uniform; //cloud; //triSurfaceMeshPointSet;
uniformCoeffs
{
type uniform;
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
to the simpler
// Seeding method.
seedSampleSet
{
type uniform;
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
which also support the "<type>Coeffs" form
// Seeding method.
seedSampleSet
{
type uniform;
uniformCoeffs
{
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
}
- suppress error messages that appear with zsh.
According to unset(1p), 'unset -f' unsets a function.
If the function was not previously defined, this is a no-op.
This is similar for zsh, but there it emits a warning if the
function was not previously defined.
- avoid 'local' in functions sources from etc/bashrc.
ksh does not support this.
- use 'command' shell builtin instead of 'type'.
Seems to be more consistent between shell flavours.
- use InfoSwitch to disable, or via static method.
- respect the state of the argList banner when deciding to emit
initialization information. Can otherwise end up with unwanted
output rubbish on things like foamDictionary and foamListTimes.
by combining with and rationalizing functionality from
turbulentHeatFluxTemperatureFvPatchScalarField.
externalWallHeatFluxTemperatureFvPatchScalarField now replaces
turbulentHeatFluxTemperatureFvPatchScalarField which is no longer needed and has
been removed.
Description
This boundary condition applies a heat flux condition to temperature
on an external wall in one of three modes:
- fixed power: supply Q
- fixed heat flux: supply q
- fixed heat transfer coefficient: supply h and Ta
where:
\vartable
Q | Power [W]
q | Heat flux [W/m^2]
h | Heat transfer coefficient [W/m^2/K]
Ta | Ambient temperature [K]
\endvartable
For heat transfer coefficient mode optional thin thermal layer resistances
can be specified through thicknessLayers and kappaLayers entries.
The thermal conductivity \c kappa can either be retrieved from various
possible sources, as detailed in the class temperatureCoupledBase.
Usage
\table
Property | Description | Required | Default value
mode | 'power', 'flux' or 'coefficient' | yes |
Q | Power [W] | for mode 'power' |
q | Heat flux [W/m^2] | for mode 'flux' |
h | Heat transfer coefficient [W/m^2/K] | for mode 'coefficent' |
Ta | Ambient temperature [K] | for mode 'coefficient' |
thicknessLayers | Layer thicknesses [m] | no |
kappaLayers | Layer thermal conductivities [W/m/K] | no |
qr | Name of the radiative field | no | none
qrRelaxation | Relaxation factor for radiative field | no | 1
kappaMethod | Inherited from temperatureCoupledBase | inherited |
kappa | Inherited from temperatureCoupledBase | inherited |
\endtable
Example of the boundary condition specification:
\verbatim
<patchName>
{
type externalWallHeatFluxTemperature;
mode coefficient;
Ta uniform 300.0;
h uniform 10.0;
thicknessLayers (0.1 0.2 0.3 0.4);
kappaLayers (1 2 3 4);
kappaMethod fluidThermo;
value $internalField;
}
\endverbatim
- just check WM_PROJECT_DIR instead.
- provide a fallback value when FOAM_EXT_LIBBIN might actually be needed.
Only strictly need FOAM_EXT_LIBBIN for scotch/metis decomposition, and
when these are actually supplied by ThirdParty.
All other ThirdParty dependencies are referenced by BOOST_ARCH_PATH etc.
Can therefore drop the FOAM_EXT_LIBBIN dependency for VTK-related
things, which do not use scotch/metis anyhow.
snappyHexMesh produces a far better quality AMI interface using a cylindrical background mesh,
leading to much more robust performance, even on a relatively coarse mesh. The min/max AMI
weights remain close to 1 as the mesh moves, giving better conservation.
The rotating geometry template cases are configured with a blockMeshDict file for a cylindrical
background mesh aligned along the z-axis. The details of use are found in the README and
blockMeshDict files.
Uncommenting the patches provides a convenient way to use the patches in the background mesh
to define the external boundary of the final mesh. Replaces previous setup with a separate
blockMeshDict.extPatches file.
- this implies that jobControl is a user-resource for OpenFOAM.
It was previously located under $WM_PROJECT_INST_DIR/jobControl,
but few users will have write access there.
- an unset FOAM_JOB_DIR variable is treated as "~/.OpenFOAM/jobControl",
which can partially reduce environment clutter.
- provide argList::noJobInfo() to conveniently suppress job-info on an
individual basis for short-running utilities (eg, foamListTimes) to
avoid unneeded clutter.
- permit SYSTEMMPI user adjustments via
etc/config.{csh,sh}/mpi-system
This can be a convenient place for setting up SYSTEMMPI for OpenFOAM
without adjusting bashrc, prefs.sh ...
- add a USERMPI type. This represents any generic mpi implementation.
The user is responsible for supplying an appropriate
wmake/rules/General/mplibUSERMPI file and managing all settings.
This type of setup can be useful in combination with specific build
systems (SPACK, EASYBUILD, etc) or module systems for which the MPI
variant is part of the installed configuration.
- lazier evaluation of project name and version based on the directory
name. Avoids heuristics based on directory names unless really needed.
- cope with alternative directory locations.
For example, OpenFOAM+VERSION etc.
The combination of the two above appears to be sufficient to open up
the directory naming possibilities.
- additional -list-test option (tests for existence of directory).
- handle sourcing bashrc with a relative path (issue #383)
- handle sourcing from bash and zsh.
Still need manual intervention when sourcing dash, sh, or ksh.
- replace grep in etc/cshrc with sed only
- logical instead of physical path for WM_PROJECT_DIR (issue #431).
Doesn't seem to be possible for csh/tcsh.
* Continue using physical locations when comparing directories,
but not for the top-level FOAM_INST_DIR, WM_PROJECT_DIR.
- relocate WM_CC, WM_CXX overrides from etc/config.*/compiler
to etc/config.*/settings to ensure that they are left untouched
when etc/config.sh/compiler is sourced while making third-party
packages (eg, gcc, llvm, CGAL).
- provide fallback FOAM_TUTORIALS setting in RunFunctions
STYLE: remove "~OpenFOAM" fallback as being too rare, non-obvious
rhoSimpleFoam now instantiates the lower-level fluidThermo which instantiates
either a psiThermo or rhoThermo according to the 'type' specification in
thermophysicalProperties, e.g.
thermoType
{
type hePsiThermo;
mixture pureMixture;
transport sutherland;
thermo janaf;
equationOfState perfectGas;
specie specie;
energy sensibleInternalEnergy;
}
instantiates a psiThermo for a perfect gas with JANAF thermodynamics, whereas
thermoType
{
type heRhoThermo;
mixture pureMixture;
properties liquid;
energy sensibleInternalEnergy;
}
mixture
{
H2O;
}
instantiates a rhoThermo for water, see new tutorial
compressible/rhoSimpleFoam/squareBendLiq.
In order to support complex equations of state the pressure can no longer be
unlimited and rhoSimpleFoam now limits the pressure rather than the density to
handle start-up more robustly.
For backward compatibility 'rhoMin' and 'rhoMax' can still be used in the SIMPLE
sub-dictionary of fvSolution which are converted into 'pMax' and 'pMin' but it
is better to set either 'pMax' and 'pMin' directly or use the more convenient
'pMinFactor' and 'pMinFactor' from which 'pMax' and 'pMin' are calculated using
the fixed boundary pressure or reference pressure e.g.
SIMPLE
{
nNonOrthogonalCorrectors 0;
pMinFactor 0.1;
pMaxFactor 1.5;
transonic yes;
consistent yes;
residualControl
{
p 1e-3;
U 1e-4;
e 1e-3;
"(k|epsilon|omega)" 1e-3;
}
}
Can now use this:
_foamSourceEtc config.sh/scotch
_foamSourceEtc config.csh/scotch
instead of this:
_foamSource $($WM_PROJECT_DIR/bin/foamEtcFile config.sh/scotch)
_foamSource `$WM_PROJECT_DIR/bin/foamEtcFile config.csh/scotch`
In the bash/sh version, leave the _foamSource function for now, since
ThirdParty is still relying on it.
STYLE: elminate while-loop for _foamAddPath etc since this type of
construct isn't readily possible for csh and isn't being used anywhere.
- as per bashrc,cshrc delimit with
"# USER EDITABLE PART"
"# END OF (NORMAL) USER EDITABLE PART"
this can help simplify any patching for system-building scripts etc.
The fundamental properties provided by the specie class hierarchy were
mole-based, i.e. provide the properties per mole whereas the fundamental
properties provided by the liquidProperties and solidProperties classes are
mass-based, i.e. per unit mass. This inconsistency made it impossible to
instantiate the thermodynamics packages (rhoThermo, psiThermo) used by the FV
transport solvers on liquidProperties. In order to combine VoF with film and/or
Lagrangian models it is essential that the physical propertied of the three
representations of the liquid are consistent which means that it is necessary to
instantiate the thermodynamics packages on liquidProperties. This requires
either liquidProperties to be rewritten mole-based or the specie classes to be
rewritten mass-based. Given that most of OpenFOAM solvers operate
mass-based (solve for mass-fractions and provide mass-fractions to sub-models it
is more consistent and efficient if the low-level thermodynamics is also
mass-based.
This commit includes all of the changes necessary for all of the thermodynamics
in OpenFOAM to operate mass-based and supports the instantiation of
thermodynamics packages on liquidProperties.
Note that most users, developers and contributors to OpenFOAM will not notice
any difference in the operation of the code except that the confusing
nMoles 1;
entries in the thermophysicalProperties files are no longer needed or used and
have been removed in this commet. The only substantial change to the internals
is that species thermodynamics are now "mixed" with mass rather than mole
fractions. This is more convenient except for defining reaction equilibrium
thermodynamics for which the molar rather than mass composition is usually know.
The consequence of this can be seen in the adiabaticFlameT, equilibriumCO and
equilibriumFlameT utilities in which the species thermodynamics are
pre-multiplied by their molecular mass to effectively convert them to mole-basis
to simplify the definition of the reaction equilibrium thermodynamics, e.g. in
equilibriumCO
// Reactants (mole-based)
thermo FUEL(thermoData.subDict(fuelName)); FUEL *= FUEL.W();
// Oxidant (mole-based)
thermo O2(thermoData.subDict("O2")); O2 *= O2.W();
thermo N2(thermoData.subDict("N2")); N2 *= N2.W();
// Intermediates (mole-based)
thermo H2(thermoData.subDict("H2")); H2 *= H2.W();
// Products (mole-based)
thermo CO2(thermoData.subDict("CO2")); CO2 *= CO2.W();
thermo H2O(thermoData.subDict("H2O")); H2O *= H2O.W();
thermo CO(thermoData.subDict("CO")); CO *= CO.W();
// Product dissociation reactions
thermo CO2BreakUp
(
CO2 == CO + 0.5*O2
);
thermo H2OBreakUp
(
H2O == H2 + 0.5*O2
);
Please report any problems with this substantial but necessary rewrite of the
thermodynamic at https://bugs.openfoam.org
Henry G. Weller
CFD Direct Ltd.
- LD_LIBRARY_PATH was not being cleaned at all when switching between
paraview versions.
- PATH was cleaned against the third-party paraview-*, although 3rd
party paraview is installed as ParaView-*.
The additional cleanup for ParaView_DIR may not catch this (if it
was unset elsewhere).
- wm32/wm64 were for changing between -m32, -m64 builds on x86_64
architectures. This is seldom enough not to warrant a special alias.
Also ambiguous if these could refer to label sizes.
- Remove wm32,wm64 aliases.
- Add wmInt32, wmInt64 aliases for switching WM_LABEL_SIZE.
Pstream: added maxCommsSize setting to do (unstructured) parallel transfers in blocks.
Tested:
- with maxCommsSize 0 produces exactly same result as plus.develop
- compiles with label64
- with maxCommsSize e.g. 3 produces exactly same result as plus.develop
- with maxCommsSize=0 exactly the same messages (with Pstream::debug = 1) as plus.develop
See merge request !85
which provided warning about backward-compatibility issue with setting div
schemes for steady-state. It caused confusion by generating incorrect warning
messages for compressible cases for which the 'bounded' should NOT be applied to
the 'div(phid,p)'.
STYLE: only use paraview settings when actually available
- this means executing makeParaView prior to building OpenFOAM itself,
but is consistent with the instructions given by makeParaView,
and elminates anticipating the source location from the paraview
config file, which increases the build flexibilty for ThirdParty
- support gperftools-none, gperftools-system configurations
as per other third-party packages.
STYLE: clean up more environment variables
CONFIG: testing adios rule
* boost 1_62_0 (Sept 2016)
* CGAL 4.9 (Sept 2016)
- now has headers-only mode that could be interesting
* FFTW 3.3.5 (Jul 2016)
* openmpi 1.10.4 (Sept 2016)
- the first openmpi 2.x release is also available, but too early to switch
* paraview 5.2.0 (Nov 2016)
- builds without additional patching
STYLE: removed unneeded CMake environment variables
- "$FOAM_USER_APPBIN" and "$FOAM_USER_LIBBIN" have been added to
"foamOldDirs" in "etc/bashrc" and "etc/config.sh/unset"
- "$OPAL_PREFIX" is now undefined in the option "SYSTEMOPENMPI" within
"etc/config.sh/mpi", but only if the path defined in this variable
is cleaned when using "foamCleanPath".
- "$OPAL_PREFIX" is now also conditionally undefined in
"etc/config.sh/unset" when the path is picked up by "foamCleanPath".
Patch contributed by Bruno Santos
Resolved bug-report http://bugs.openfoam.org/view.php?id=2210
- Now that the metisDecomp uses the metis definition for float/double,
do not need to verify the scalar sizes.
Note:
- could drop precision qualifier for metis, scotch installation
(include, lib) as being unneeded, but it is simpler to keep them
and continue to use the FOAM_EXT_LIBBIN path
(in case other ThirdParty software is compiled with different
precisions).
- Cannot test if these older reader modules actually build,
owning largely to build issues since with paraview 3.14 (Feb 2012)
and paraview 3.98 (Dec 2012) themselves.
- Follow similar pattern as per boost/CGAL with the '*-none' to disable,
and '*-system' for system installations.
Also support central non-ThirdParty installations by specifying the
version as "*-system", but also providing the fully qualified
*_ARCH_PATH too.
--
ENH: Verify label and scalar sizes used in the metis header.
- ensure they match with expected values, which can be obtained via
the OpenFOAM definitions for WM_LABEL_SIZE and WM_PRECISION_OPTION
On 64-bit systems, the system installations of boost, cgal are under
lib64/. The behaviour for a ThirdParty build is mostly lib/ but this
can also be changing.
Boost 1_62_0 and older build into 'lib/'.
CGAL-4.9 builds into 'lib64/', older versions into 'lib/'.
Future-proof things by using lib$WM_COMPILER_LIB_ARCH for boost and
cgal build rules, and forcing these as build targets in the ThirdParty
makeCGAL as well.
--
STYLE: check for boost/version.hpp, CGAL/version.h instead their directories
- On the first call, ParaView_DIR is unset and thus the clean-path
fails with the warning "ParaView_DIR: Undefined variable."
This looks messy, but is of no _major_ consequence since paraview
doesn't need to be removed anyhow. The only slight risk is that the
path to a third-party cmake might not be cleaned.
- Patch as per Bruno's suggestion.
- It is incorrect to prefix the assignment with an 'export' since this
automatically marks the overall command as successful and circumvents
the fallback.
There is no simple way to have proper behaviour when sourced with a
local directory path, but at least it now uses the fallback.
It is still easy to wreak the mechanism with valid but confusing input.
For example,
". /path/to/openfoam/etc/././bashrc"
The only real certainty is that "${BASH_SOURCE%/*}"
should point to the 'etc/' directory. In which case,
cd ${BASH_SOURCE%/*} # <- now in the etc/ directory
pwd=$(pwd -P) # <- fully-qualified path to etc/
pwd=${pwd%/*/*} # <- up two parent levels
- This works with ". ./bashrc", but fails with ". bashrc"
(probably not so common).
- Con: The construct requires an additional sub-shell.
- In the foundation version they introduced a construct to handle
the transition from 'wmRefresh' as an alias to 'wmRefresh' as
a shell function. This transition is unnecessary for OpenFOAM+
since 1606 used wmREFRESH (not wmRefresh) as an alias.
For portability it is important to avoid this non-POSIX
"type -t". It causes issues with dash and with zsh
(mentioned in issue #277).
type -t dash -> -t: not found
type -t zsh -> zsh: bad option: -t
Note: zsh users may still noticed other problems.
For example, the POSIX 'unset -f' normally has no output, but in zsh
it reports an error and has exit code 1 if the function was not
previously defined. Whereas in POSIX (including bash, dash) it only
returns non-zero if the name(s) could not be unset.
The change from C++0x to C++11 allows all of C++11 functionality to be
used in OpenFOAM, in particular constructor delegation which avoids code
duplication or constructor helper functions. However, this also means a
change to the minimum gcc version supported which is now 4.7 rather than
4.5.
Note that gcc-4.7 does not support the entire C++11 standard but does
support all of the functionality currently needed for further OpenFOAM
development. The minimum gcc-version which supports the entire C++11
standard is 4.8 which is now the recommended minimum gcc version.
- instead we use the CGAL settings directly since they have the
same option of (version | system | none)
- may wish to review this again in the future.
- export/setenv WM_COMPILER_TYPE as suggested by Mattijs.
- for overall consistency, don't carp about an unset WM_COMPILER_TYPE,
since this would only be on the first instance (prior to the
export/setenv) and would be confusing about why/when this message
may occur.
- reduce clutter: only use (system|ThirdParty) for WM_COMPILER_TYPE.
Drop the old 'OpenFOAM' setting for WM_COMPILER_TYPE, which was
transitional in early 2011.
- make the error messages more meaningful
- move unset mpi buffer size from config.csh/settings -> config.csh/mpi
- wmUNSET now also unalias wmREFRESH
Note: unsetenv WM_COMPILER_TYPE in csh variant?
- drop reference to paraview-3 in config files.
Cannot say anything definite about support for versions
this old (2012)
- replace with an alternative workaround.
Unset the _foamAddLib function prior to sourcing config.sh/CGAL:
- LD_LIBRARY_PATH will not be adjusted.
- cgal_version/boost_version variables will be retained.
Note: for ThirdParty builds, it is important that the boost and CGAL
paths are added into LD_LIBRARY_PATH even if before they are created.
This ensures that the OpenFOAM environment is functional after the
build.
The '*-none' and '*-system' specifications can still be used to avoid
setting them at all.
- not previously possible to configure a third-party gcc
with system gmp/mpfr/mpc.
This makes it easier to switch between compilers for testing.
- use system libraries by default
Replaced the 'postProcess' argument to the 'write' and 'execute'
functions with the single static member 'postProcess' in the
functionObject base-class.
The use of the term 'source' in the context of post-processing is
confusing and does not properly describe the process of region
selection. The new names 'surfaceRegion' and 'volRegion' better
describe the purpose of the functionObjects which is to provide field
processing functionality limited to a specified region of space, either
a surface or volume.
The keyword 'source' is renamed 'regionType' which better describes the
purpose which is to specify the method by which the surface or volume
region is selected.
The keyword to select the name of the surface or volume region is
renamed from 'sourceName' to 'name' consistent with the other
name-changes above.
FOAM_INST_DIR is the location of the OpenFOAM installation which defaults to
the directory containing the etc/bashrc,cshrc file. If this default is
not appropriate FOAM_INST_DIR can be set explicitly.
with the more general and flexible 'postProcess' utility and '-postProcess' solver option
Rationale
---------
Both the 'postProcess' utility and '-postProcess' solver option use the
same extensive set of functionObjects available for data-processing
during the run avoiding the substantial code duplication necessary for
the 'foamCalc' and 'postCalc' utilities and simplifying maintenance.
Additionally consistency is guaranteed between solver data processing
and post-processing.
The functionObjects have been substantially re-written and generalized
to simplify development and encourage contribution.
Configuration
-------------
An extensive set of simple functionObject configuration files are
provided in
OpenFOAM-dev/etc/caseDicts/postProcessing
and more will be added in the future. These can either be copied into
'<case>/system' directory and included into the 'controlDict.functions'
sub-dictionary or included directly from 'etc/caseDicts/postProcessing'
using the '#includeEtc' directive or the new and more convenient
'#includeFunc' directive which searches the
'<etc>/caseDicts/postProcessing' directories for the selected
functionObject, e.g.
functions
{
#includeFunc Q
#includeFunc Lambda2
}
'#includeFunc' first searches the '<case>/system' directory in case
there is a local configuration.
Description of #includeFunc
---------------------------
Specify a functionObject dictionary file to include, expects the
functionObject name to follow (without quotes).
Search for functionObject dictionary file in
user/group/shipped directories.
The search scheme allows for version-specific and
version-independent files using the following hierarchy:
- \b user settings:
- ~/.OpenFOAM/\<VERSION\>/caseDicts/postProcessing
- ~/.OpenFOAM/caseDicts/postProcessing
- \b group (site) settings (when $WM_PROJECT_SITE is set):
- $WM_PROJECT_SITE/\<VERSION\>/caseDicts/postProcessing
- $WM_PROJECT_SITE/caseDicts/postProcessing
- \b group (site) settings (when $WM_PROJECT_SITE is not set):
- $WM_PROJECT_INST_DIR/site/\<VERSION\>/caseDicts/postProcessing
- $WM_PROJECT_INST_DIR/site/caseDicts/postProcessing
- \b other (shipped) settings:
- $WM_PROJECT_DIR/etc/caseDicts/postProcessing
An example of the \c \#includeFunc directive:
\verbatim
#includeFunc <funcName>
\endverbatim
postProcess
-----------
The 'postProcess' utility and '-postProcess' solver option provide the
same set of controls to execute functionObjects after the run either by
reading a specified set of fields to process in the case of
'postProcess' or by reading all fields and models required to start the
run in the case of '-postProcess' for each selected time:
postProcess -help
Usage: postProcess [OPTIONS]
options:
-case <dir> specify alternate case directory, default is the cwd
-constant include the 'constant/' dir in the times list
-dict <file> read control dictionary from specified location
-field <name> specify the name of the field to be processed, e.g. U
-fields <list> specify a list of fields to be processed, e.g. '(U T p)' -
regular expressions not currently supported
-func <name> specify the name of the functionObject to execute, e.g. Q
-funcs <list> specify the names of the functionObjects to execute, e.g.
'(Q div(U))'
-latestTime select the latest time
-newTimes select the new times
-noFunctionObjects
do not execute functionObjects
-noZero exclude the '0/' dir from the times list, has precedence
over the -withZero option
-parallel run in parallel
-region <name> specify alternative mesh region
-roots <(dir1 .. dirN)>
slave root directories for distributed running
-time <ranges> comma-separated time ranges - eg, ':10,20,40:70,1000:'
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
pimpleFoam -postProcess -help
Usage: pimpleFoam [OPTIONS]
options:
-case <dir> specify alternate case directory, default is the cwd
-constant include the 'constant/' dir in the times list
-dict <file> read control dictionary from specified location
-field <name> specify the name of the field to be processed, e.g. U
-fields <list> specify a list of fields to be processed, e.g. '(U T p)' -
regular expressions not currently supported
-func <name> specify the name of the functionObject to execute, e.g. Q
-funcs <list> specify the names of the functionObjects to execute, e.g.
'(Q div(U))'
-latestTime select the latest time
-newTimes select the new times
-noFunctionObjects
do not execute functionObjects
-noZero exclude the '0/' dir from the times list, has precedence
over the -withZero option
-parallel run in parallel
-postProcess Execute functionObjects only
-region <name> specify alternative mesh region
-roots <(dir1 .. dirN)>
slave root directories for distributed running
-time <ranges> comma-separated time ranges - eg, ':10,20,40:70,1000:'
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
The functionObjects to execute may be specified on the command-line
using the '-func' option for a single functionObject or '-funcs' for a
list, e.g.
postProcess -func Q
postProcess -funcs '(div(U) div(phi))'
In the case of 'Q' the default field to process is 'U' which is
specified in and read from the configuration file but this may be
overridden thus:
postProcess -func 'Q(Ua)'
as is done in the example above to calculate the two forms of the divergence of
the velocity field. Additional fields which the functionObjects may depend on
can be specified using the '-field' or '-fields' options.
The 'postProcess' utility can only be used to execute functionObjects which
process fields present in the time directories. However, functionObjects which
depend on fields obtained from models, e.g. properties derived from turbulence
models can be executed using the '-postProcess' of the appropriate solver, e.g.
pisoFoam -postProcess -func PecletNo
or
sonicFoam -postProcess -func MachNo
In this case all required fields will have already been read so the '-field' or
'-fields' options are not be needed.
Henry G. Weller
CFD Direct Ltd.
the equivalent functionality is provided by the writeRegisteredObject
functionObject in a MUCH simpler, easier and extensible manner.
functionObject: Removed the now redundant 'timeSet' function.
codedFunctionObject: Added the "codeWrite" entry
for the "write" function for consistency.
The previous method of using the "code" entry for the "write"
function was inconsistent and very confusing.
This changes simplifies the specification of functionObjects in
controlDict and is consistent with the 'libs' option in controlDict to
load special solver libraries.
Support for the old 'functionObjectLibs' name is supported for backward compatibility.
- Avoids the need for the 'OutputFilterFunctionObject' wrapper
- Time-control for execution and writing is now provided by the
'timeControlFunctionObject' which instantiates the processing
'functionObject' and controls its operation.
- Alternative time-control functionObjects can now be written and
selected at run-time without the need to compile wrapped version of
EVERY existing functionObject which would have been required in the
old structure.
- The separation of 'execute' and 'write' functions is now formalized in the
'functionObject' base-class and all derived classes implement the
two functions.
- Unnecessary implementations of functions with appropriate defaults
in the 'functionObject' base-class have been removed reducing
clutter and simplifying implementation of new functionObjects.
- The 'coded' 'functionObject' has also been updated, simplified and tested.
- Further simplification is now possible by creating some general
intermediate classes derived from 'functionObject'.
to have the prefix 'write' rather than 'output'
So outputTime() -> writeTime()
but 'outputTime()' is still supported for backward-compatibility.
Also removed the redundant secondary-writing functionality from Time
which has been superseded by the 'writeRegisteredObject' functionObject.
for consistency with the time controls in controlDict and to avoid
unnecessary confusion. All code and tutorials have been updated.
The old names 'outputControl' and 'outputInterval' are but supported for
backward compatibility but deprecated.
See commit b627924a4bf104521b567d3aa3dc80c864325b1a
Allwmake: Added scripted changes for REALTYPEWIDTH and IDXTYPEWIDTH
Patch contributed by Bruno Santos
Resolves bug-report http://bugs.openfoam.org/view.php?id=2085
Rather than requiring each functionObject to handle failed construction
internally (using the active_ flag) the static member function "viable"
is provided which returns true if construction of the functionObject is
likely to be successful. Failed construction is then handled by the
wrapper-class which constructs the functionObject,
e.g. "OutputFilterFunctionObject".
Given that the type of the dimensioned internal field is encapsulated in
the GeometricField class the name need not include "Field"; the type
name is "Internal" so
volScalarField::DimensionedInternalField -> volScalarField::Internal
In addition to the ".dimensionedInternalField()" access function the
simpler "()" de-reference operator is also provided to greatly simplify
FV equation source term expressions which need not evaluate boundary
conditions. To demonstrate this kEpsilon.C has been updated to use
dimensioned internal field expressions in the k and epsilon equation
source terms.
Patch contributed by Bruno Santos:
- "etc/config.sh/CGAL":
- Indented the contents of the recently added if block.
- Added comment about using system versions.
- Library paths are now only added if the respective version is not "boost-system" and "cgal-system".
- "src/renumber/Allwmake":
It now relies on the previous file to get the version for
Boost (the same way as in "makeCGAL"). This is so that it will also
build "SloanRenumber" if "boost_version" is set to "boost-system".
- "applications/utilities/mesh/generation/Allwmake":
It now also relies on the script "config.sh/CGAL" to get the
version for CGAL. If "cgal_version" is set to "cgal-system", it
will now also build "foamy*Mesh" utilities and respective
libraries.
Resolves report http://www.openfoam.org/mantisbt/view.php?id=1232
1. "foamCompiler" was changed to a more permanent "WM_COMPILER_TYPE"
environment variable, so that it can be used by 3rd party
installation scripts, such as "makeGcc", "makeLLVM" and so on. More
on this will be provided in issue #1215.
2. The script functions such as "_foamSource()" and "_foamAddPath()"
were moved to a new file "etc/config.sh/functions". It has the
ability to set or unset, depending on whether "WM_BASH_FUNCTIONS" is
defined or not. This allows for these functions to be reused by
other scripts, such as "makeGcc".
3. The script "etc/config.sh/CGAL" relies on whether a local
environment variable "SOURCE_CGAL_VERSIONS_ONLY" is defined or not,
so that it will load only the version settings if it's defined. This
is to make it easier to call this script from "makeCGAL". Although
it still feels a bit of a clunky hack, but I didn't manage to deduce
any other way we could do this :( I didn't add indentation within
the if-block, to make it easier to read the changes. In addition,
the local variable "common_path" is used to shorten the length of
the lines and use slightly less repeated code.
4. Added another new script "etc/config.sh/compiler", which has only
the version numbers for the compilers taken out from the "settings"
file. It currently depends on "WM_COMPILER_TYPE" for setting the
variables, the same way it did with "foamCompiler". This script is
now always sourced from the "settings" file, for the following
reasons:
- "makeGCC" and "makeLLVM" can now take advantage of this script file.
- The example "compiler" script (detailed next) can rely on this
script file and then override parameters on-demand, as well as
allowing for system compilers to have dedicated settings, such as
setting "WM_CC". This is similar to how the example environment
script for "paraview" works.
5. To the script "etc/config.sh/example/compiler" were added a few more examples:
- It now starts with a block where it first loads the default "compiler" script.
- Has a "WM_COMPILER=Gcc48u" case example for when we try to use GCC
4.8 in Ubuntu 15.10. This is just to give the idea that in a
particular system, we might have several system-wide compiler
versions. For example, in Ubuntu 15.10, there is GCC 4.7, 4.8 and
5.2, which could be used for testing performances or compatibility
with some other 3rd party library.
- Has the "WM_COMPILER=Icc" case example, related to the original bug
report, where "WM_CC=icc" and "WM_CXX=icpc", so that the user then
simply copies this file to their own local preferences folder.
6. Small bug fix in "etc/config.sh/mpi", where unsetting "minBufferSize" was missing at the end of the script.
7. Small change in "etc/config.sh/paraview", where "CMAKE_ROOT" is set
along with "CMAKE_HOME". This is due to a rare issue that occurs on
people's systems where they have a custom system-wide CMake version
installed and which is used by having "CMAKE_ROOT" set on that
environment. This can mess up OpenFOAM's custom ParaView builds,
given that conflicting CMake versions can lead to not building
ParaView at all.
- For more details about "CMAKE_ROOT":
https://cmake.org/Wiki/CMake_Useful_Variables [^]
8. The scripts "_foamAddPath _foamAddLib _foamAddMan" were not being
unset at the end of "settings". They are now unset at the end of
"bashrc", through a call to the new double-use "functions" script.
Additionally all references to "foamCompiler" have been changed to
"WM_COMPILER_TYPE".
See also http://www.openfoam.org/mantisbt/view.php?id=1232
etc/config.sh and etc/config.csh
This structure is more convenient to add support for other shells, e.g. zsh, fish etc.
Resolves feature request to simplify support for other shells in
http://www.openfoam.org/mantisbt/view.php?id=1232
Function1 is an abstract base-class of run-time selectable unary
functions which may be composed of other Function1's allowing the user
to specify complex functions of a single scalar variable, e.g. time.
The implementations need not be a simple or continuous functions;
interpolated tables and polynomials are also supported. In fact form of
mapping between a single scalar input and a single primitive type output
is supportable.
The primary application of Function1 is in time-varying boundary
conditions, it also used for other functions of time, e.g. injected mass
is spray simulations but is not limited to functions of time.
Uses a system/caseProperties file to select templates from
etc/caseDicts/createZeroDirectoryTemplates to enable high-level setup
of a case.
See
- etc/caseDicts/createZeroDirectoryTemplates
- tutorials/preProcessing/createZeroDirectory
