- bundles frequently used 'gather/scatter' patterns more consistently.
- combineAllGather -> combineGather + broadcast
- listCombineAllGather -> listCombineGather + broadcast
- mapCombineAllGather -> mapCombineGather + broadcast
- allGatherList -> gatherList + scatterList
- reduce -> gather + broadcast (ie, allreduce)
- The allGatherList currently wraps gatherList/scatterList, but may be
replaced with a different algorithm in the future.
STYLE: PstreamCombineReduceOps.H is mostly unneeded now
- also disables PointData if manifold cells are detected.
This is a partial workaround for volPointInterpolation problems
with handling manifold cells.
- additional verbosity option for conversions
- ignore old `-finite-area` option and always convert available
finiteArea mesh/fields unless `-no-finite-area` is specified (#2374)
ENH: simplify point offset handling for ensight output
- extend writing to include compact face/cell lists
- a try/catch approach is not really robust enough (or even possible)
since read failures likely do not occur on all ranks simultaneously.
This leads to situations where the master has thrown an exception
(and thus exiting the current routine) while other ranks are still
waiting to receive data and the program blocks completely.
Since this primarily affects data conversion routines such as
foamToEnsight etc, treat similarly to lagrangian: check for the
existence of essential files before proceeding or not. This is
wrapped into a TryNew factory method:
autoPtr<faMesh> faMeshPtr(faMesh::TryNew(mesh));
if (faMeshPtr) ...
- the very old 'writer' class was fully stateless and always templated
on an particular output type.
This is now replaced with a 'coordSetWriter' with similar concepts
as previously introduced for surface writers (#1206).
- writers change from being a generic state-less set of routines to
more properly conforming to the normal notion of a writer.
- Parallel data is done *outside* of the writers, since they are used
in a wide variety of contexts and the caller is currently still in
a better position for deciding how to combine parallel data.
ENH: update sampleSets to sample on per-field basis (#2347)
- sample/write a field in a single step.
- support for 'sampleOnExecute' to obtain values at execution
intervals without writing.
- support 'sets' input as a dictionary entry (as well as a list),
which is similar to the changes for sampled-surface and permits use
of changeDictionary to modify content.
- globalIndex for gather to reduce parallel communication, less code
- qualify the sampleSet results (properties) with the name of the set.
The sample results were previously without a qualifier, which meant
that only the last property value was actually saved (previous ones
overwritten).
For example,
```
sample1
{
scalar
{
average(line,T) 349.96521;
min(line,T) 349.9544281;
max(line,T) 350;
average(cells,T) 349.9854619;
min(cells,T) 349.6589286;
max(cells,T) 350.4967271;
average(line,epsilon) 0.04947733869;
min(line,epsilon) 0.04449639927;
max(line,epsilon) 0.06452856475;
}
label
{
size(line,T) 79;
size(cells,T) 1720;
size(line,epsilon) 79;
}
}
```
ENH: update particleTracks application
- use globalIndex to manage original parcel addressing and
for gathering. Simplify code by introducing a helper class,
storing intermediate fields in hash tables instead of
separate lists.
ADDITIONAL NOTES:
- the regionSizeDistribution largely retains separate writers since
the utility of placing sum/dev/count for all fields into a single file
is questionable.
- the streamline writing remains a "soft" upgrade, which means that
scalar and vector fields are still collected a priori and not
on-the-fly. This is due to how the streamline infrastructure is
currently handled (should be upgraded in the future).
GIT: relocate globalIndex (is independent of mesh)
STYLE: include label/scalar Fwd in contiguous.H
STYLE: unneed commSchedule include in GeometricField
- do not need STRINGIFY macros in ragel code
- remove wordPairHashTable.H and use equivalent wordPairHashes.H instead
STYLE: replace addDictOption with explicit option
- the usage text is otherwise misleading
GIT: combine Pair/Tuple2 directories
- set() was silently deprecated in favour of reset() FEB-2018
since the original additional check for overwriting an existing
pointer was never used. The reset(...) name is more consistent
with unique_ptr, tmp etc.
Now emit deprecations for set().
- use direct test for autoPtr, tmp instead of valid() method.
More consistent with unique_ptr etc.
STYLE: eliminate redundant ptr() use on cloned quantities
The utility will now add field data to all tracks (previous version only
created the geometry)
The new 'fields' entry can be used to output specific fields.
Example
cloud reactingCloud1;
sampleFrequency 1;
maxPositions 1000000;
fields (d U); // includes wildcard support
STYLE: minor typo fix
- similar to -dry-run handling, can be interrogated from argList,
which makes it simpler to add into utilities.
- support multiple uses of -dry-run and -verbose to increase the
level. For example, could have
someApplication -verbose -verbose
and inside of the application:
if (args.verbose() > 2) ...
BUG: error with empty distributed roots specification (fixes#2196)
- previously used the size of distributed roots to transmit if the
case was running in distributed mode, but this behaves rather poorly
with bad input. Specifically, the following questionable setup:
distributed true;
roots ( /*none*/ );
Now transmit the ParRunControl distributed() value instead,
and also emit a gentle warning for the user:
WARNING: running distributed but did not specify roots!
- argList::envExecutable() static method.
This is identical to getEnv("FOAM_EXECUTABLE"), where the name of
the executable has typically been set from the argList construction.
Provides a singleton access to this value from locations that
do not have knowledge of the originating command args (argList).
This is a similar rationale as for the argList::envGlobalPath() static.
- additional argList::envRelativePath() static method.
- make -dry-run handling more central and easier to use by adding into
argList itself.
STYLE: drop handling of -srcDoc (v1706 option)
- replaced with -doc-source for 1712 and never used much anyhow
- previously used an indirect patch to get the sampling locations,
but this doesn't take account of the face flips. Now use
the faceZone intrinsic for generating a properly flipped patch
and provide the sampling locations separately.
STYLE: adjust compatiblity header for surfaceMeshWriter
- improved separation of patch creation that is also parallel-aware,
which now allows creation in parallel
- memory-safe use of PtrList for adding patches, with a more generalized
faPatchData helper
- use uindirectPrimitivePatch instead of indirectPrimitivePatch
for internal patch handling.
- align boundary methods with polyMesh equivalents
- system/faMeshDefinition instead of constant/faMesh/faMeshDefinition
as per blockMesh convention. Easier to manage definitions, easier
for cleanup.
- drop inheritence from GeoMesh.
- intended for the following type of use:
auto oldHandler = fileHandler(fileOperation::NewUncollated());
... do something that only works with uncollated
// Restore previous (if any)
if (oldHandler)
{
fileHandler(std::move(oldHandler));
}
ENH: make fileOperation distributed(bool) mutable
- use is "static-like" and akin to Pstream::parRun(bool),
thus allow toggling of the switch without a const_cast
- reduces code, simplifies creation of new, specialized polyData
writers.
- new templated vtk::GenericPatchWriter, which adds support for
writing both uindirectPrimitivePatch + indirectPrimitivePatch types.
- handle geometric fields separately from regular fields with
* vtk:GenericPatchGeoFieldsWriter
* vtk:indirectPatchGeoFieldsWriter
* vtk:uindirectPatchGeoFieldsWriter
Step 1.
include "addAllRegionOptions.H"
Adds the -allRegions, -regions and -region options to argList.
Step 2.
include "getAllRegionOptions.H"
Processes the options with -allRegions selecting everything
from the regionProperties.
OR use -regions to specify multiple regions (from
regionProperties), and can also contain regular expressions
OR use the -region option
Specifying a single -regions NAME (not a regular expresssion)
is the same as -region NAME and doesn't use regionProperties
Creates a `wordList regionNames`
Step 3.
Do something with the region names.
Either directly, or quite commonly with the following
include "createNamedMeshes.H"
Creates a `PtrList<fvMesh> meshes`
STYLE: add description to some central include files
- wrap command-line retrieval of fileName with an implicit validate.
Instead of this:
fileName input(args[1]);
fileName other(args["someopt"]);
Now use this:
auto input = args.get<fileName>(1);
auto other = args.get<fileName>("someopt");
which adds a fileName::validate on the inputs
Because of how it is implemented, it will automatically also apply
to argList getOrDefault<fileName>, readIfPresent<fileName> etc.
- adjust fileName::validate and clean to handle backslash conversion.
This makes it easier to ensure that path names arising from MS-Windows
are consistently handled internally.
- dictionarySearch: now check for initial '/' directly instead of
relying on fileName isAbsolute(), which now does more things
BREAKING: remove fileName::clean() const method
- relying on const/non-const to control the behaviour (inplace change
or return a copy) is too fragile and the const version was
almost never used.
Replace:
fileName sanitized = constPath.clean();
With:
fileName sanitized(constPath);
sanitized.clean());
STYLE: test empty() instead of comparing with fileName::null
- simplifies local toggling.
- centralize fileModification static variables into IOobject.
They were previously scattered between IOobject and regIOobject
- direct check of punctuation.
For example,
while (!tok.isPunctuation(token::BEGIN_LIST)) ..
instead of
while (!(tok.isPunctuation() && tok.pToken() == token::BEGIN_LIST)) ..
Using direct comparison (tok != token::BEGIN_LIST) can be fragile
when comparing int values:
int c = readChar(is);
while (tok != c) .. // Danger, uses LABEL comparison!
- direct check of word.
For example,
if (tok.isWord("uniform")) ..
instead of
if (tok.isWord() && tok.wordToken() == "uniform") ..
- make token lineNumber() a setter method
ENH: adjust internal compound method empty() -> moved()
- support named compound tokens
STYLE: setter method for stream indentation
The SPL can now be weighted according to the new 'SPLweighting' entry
that can be set to:
- none: no weighting
- dBA : dB(A)
- dBB : dB(B)
- dBC : dB(C)
- dBD : dB(D)
This commit also includes code refactoring of the noiseModel class to
remove the dependency on noiseFFT/declutter.
- robuster matching behaviour when encountering paths that themselves
contain the word "processor" in them. For example,
"/path/processor0generation2/case1/processor10/system"
will now correctly match on processor10 instead of failing.
- use procRangeType for encapsulating the processor ranges
- provision for information of distributed vs non-distributed roots.
The information is currently available from the initial setup, but
can useful to access directly within fileOperation.
STYLE: modernize list iteration
- the problem arises when output fields are missing on some
processors.
When the information is combined, the resulting HashTables can have
different insertion orders. This poses an issue when there are hash
key collisions and thus different chaining.
- Use sorted order.
- introduce WM_COMPILE_CONTROL variable to convey control information
into the build rules.
The convention (as per spack):
- '+' to select a feature
- '~' to deselect a feature
Eg, to select the gold linker, and disable openmp
(spaces are not required):
WM_COMPILE_CONTROL="+gold ~openmp"
CONFIG: accept FOAM_EXTRA_LDFLAGS for AMD, gold, Mingw linkers
CONFIG: generalize PROJECT_LIBS (-ldl used almost universally)
- with '&&' conditions, often better to check for non-null autoPtr
first (it is cheap)
- check as bool instead of valid() method for cleaner code, especially
when the wrapped item itself has a valid/empty or good.
Also when handling multiple checks.
Now
if (ptr && ptr->valid())
if (ptr1 || ptr2)
instead
if (ptr.valid() && ptr->valid())
if (ptr1.valid() || ptr2.valid())
- the earlier implementation of externally controlled lumped point
motion (see merge request !120 and OpenFOAM-v1706 release notes) was
conceived for the motion of simple structures such as buildings or
simple beams. The motion controller was simply defined in terms of
an orientation axis and divisions along that axis.
To include complex structures, multiple motion controllers are
defined in terms of support points and connectivity.
The points can have additional node Ids associated with them, which
makes it easier to map to/from FEA models.
OLD system/lumpedPointMovement specification
--------------------------------------------
//- Reference axis for the locations
axis (0 0 1);
//- Locations of the lumped points
locations (0 0.05 .. 0.5);
NEW system/lumpedPointMovement specification
--------------------------------------------
// Locations of the lumped points
points
(
(0 0 0.00)
(0 0 0.05)
...
(0 0 0.50)
);
//- Connectivity for motion controllers
controllers
{
vertical
{
pointLabels (0 1 2 3 4 5 6 7 8 9 10);
}
}
And the controller(s) must be associated with the given
pointDisplacement patch. Eg,
somePatch
{
type lumpedPointDisplacement;
value uniform (0 0 0);
controllers ( vertical ); // <-- NEW
}
TUT: adjust building motion tutorial
- use new controllor definitions
- replace building response file with executable
- add updateControl in dynamicMeshDict for slowly moving structure
