- previously hard-coded, now adjustable within PDRsetFieldsDict
// Change some predefined patch names
patchNames
{
ground ground;
outer outer;
}
ENH: additions to PDRutils, improve comments
- expose enumerated expansion names and gridControl (PDRblock).
Not commonly needed, but useful to have access when defining
other grid generators
TUT: update PDRsetFieldsDict and tutorials to use "ground"
- remove tutorial references to unused types and legacy obstacles
- use "ground" for the boundary conditions instead of "seaGround".
Consistent with PDRblockMesh
1) PhaseIncompressibleTurbulenceModel class was changed to use
uniform alpha and non-uniform rho templates. This fits the need
of incompressible two phase turbulence models.
2) A new type DPMIncompressibleTurbulenceModel was created for
non-uniform alpha and uniform rho. It is used in single phase flows
in DPM solvers where alpha represents the volumen occupancy.
3) A new type incompressibleRhoTurbulenceModel was created where
non-uniform rho is allowed.
4) A new base templated turbulent class for two-phase VOF named
VoFphaseTurbulentTransportModel was implemented which is created
templating on PhaseIncompressibleTurbulenceModel and
incompressibleRhoTurbulenceModel
5) In order to make the chnage to rho based VOF turbulence a help
class was added incompressibleInterPhaseTransportModel templated
on the mixing.
COMP: fix SP/DP inconsistency in fvGeometryScheme
STYLE: rename polyMesh::updateGeom to polyMesh::updateGeomPoints
- avoids compiler complaints and potential masking of
primitiveMesh::updateGeom / fvMesh::updateGeom
- mark argument as movable, since that is what is happening inside.
GIT: remove merge cruft
TUT: better clean on MPPICInterFoam
This adds a 'geometry' scheme section to the system/fvSchemes:
geometry
{
type highAspectRatio;
}
These 'fvGeometryMethod's are used to calculate
- deltaCoeffs
- nonOrthoCoeffs
etc and can even modify the basic face/cellCentres calculation.
Creates volume fields whose boundaries are used to store patch interaction
statistics.
Current field output per patch face:
- \<cloud\>\<model\>:count - cumulative particle hits
- \<cloud\>\<model\>:mass - cumuluative mass of hitting particles
Fields can be reset according to:
- none: fields are not reset
- timeStep: reset at each time step
- writeTime: reset at each write time
Usage
patchInteractionFields1
{
type patchInteractionFields;
resetMode writeTime;
}
Member function dKcdTbyKc in thermo.H is calculated from S and G at Pstd.
Thus dGdT was removed from the thermos.
- Add optional hRef, eRef and Tref as optional.
- Use new thermo to multiphase solver icoReactingMuliPhaseFoam
- Remove hRefConst and eRefConst thermos.
TUT: Updated tutorials
The generalizedNewtonian viscocity models were ported from
the org version and added to the laminar turbulence framework.
This allows use in compressible and incompressible solvers
through the turbulence dictionary under the laminar sub-dictionary.
The thermal laminar viscosity is taken from the thermo for solvers
that use thermo library or from the transportProperties dictionary
for incompressible solvers.
At the moment the option to include viscocity models through the
transportDict is still available.
The icoTabulated equation of state was ported from the org version.
STYLE: use 'model' instead of 'laminarModel' in tutorials
- New solver: `acousticFoam`
- New base finite-area region class: `regionFaModel`
- New base shell model classes:
- `vibrationShellModel`
- `thermalShellModel`
- New shell models:
- A vibration-shell model: `KirchhoffShell`
- A thermal-shell model: `thermalShell`
- New finite-area/finite-volume boundary conditions:
- `clampedPlate`
- `timeVaryingFixedValue`
- `acousticWaveTransmissive`
- New base classes for `fvOption` of finite-area methods: `faOption`
- New `faOption`s:
- `contactHeatFluxSource`
- `externalFileSource`
- `externalHeatFluxSource`
- `jouleHeatingSource`
- New tutorial: `compressible/acousticFoam/obliqueAirJet`
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
Shows an example of the new recyclePatchInteraction model
- particles that escape from the outlet are recycled back into the
domain via the second inlet
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
- weight fields are combined by multiplication
- volFieldValue:
* 0-N scalar fields
- surfaceFieldValue:
* 0-N scalar fields
* 0-1 vector fields
In some cases this can be used to avoid creating additional
fields.
weightFields (rho U);
vs.
derivedFields (rhoU);
weightField rhoU;
- when sampling onto a meshed surface, the sampling surface may be
outside of the mesh region, or simply too far away to be considered
reasonable.
Can now specify a max search distance and default values for samples
that are too distant.
If a default value is not specified, uses Type(Zero).
Eg,
maxDistance 0.005;
defaultValue
{
"p.*" 1e5;
T 273.15;
U (-100 -100 -100);
}
- additional "names" entry to specify a word/regex list of selections
For example,
{
type patch;
name inlets;
names ("inlet_[0-9].*" inlet);
}
- if "names" exists AND contains a literal (non-regex) that can be used
as a suitable value for "name", the "name" entry becomes optional.
For example,
{
type patch;
names ("inlet_[0-9].*" inlet);
// inferred name = inlet
}
- reduce some overhead in surfaceFieldValue
TUT: surfaceFieldValue on patches : reactingParcelFoam/verticalChannel
- For slow oscillations it can be more intuitive to specify the
period.
ENH: separate mark/space for Square
- makes it easier to tailor the desired intervals.
BUG: incorrect square wave fraction with negative phase shifts
ENH: additional cosine Function1
STYLE: avoid code duplication by inheriting Cosine/Square from Sine.
Computes a histogram for the distribution of particle diameters
and corresponding number of particles hitting on a given list of patches.
A minimal example by using `constant/reactingCloud1Properties.cloudFunctions`:
```
patchParticleHistogram1
{
// Mandatory entries (unmodifiable)
type patchParticleHistogram;
patches (<patch1> <patch2> ... <patchN>);
nBins 10;
min 0.1;
max 10.0;
maxStoredParcels 20;
}
```
- code reduction, documentation, code stubs for spheroid (#1901)
- make searchableSurfaceCollection available as 'collection'
for consistency with other objects
- add -recentre option to shift points according to the bounding box
centre before performing other operations
- add -auto-origin to use the bounding box centre as the origin for
rotations. Has lower priority than the -origin option.
- surfaceTransformPoints now has distinct -read-scale, -write-scale
options (as per surfaceMeshConvert). Silently accepts -scale as
equivalent to -write-scale, for backwards compatibility and
similarity with transformPoints
- add -steps option for surfaceRefineRedGreen for successive
refinement
Allows specification of extrusion path using blockMesh 'edges' syntax.
See tutorials/mesh/extrudeMesh/polyline
Contribution by Ivor Clifford/Paul Scherrer Institut
- in most cases this eliminates manually calculation of circumferential
points.
TUT: improve parameterization of sphere blockMeshDict
- allow separate parameterization of radius, ratio of inner to outer,
and the number of divisions in x/y/z and radial directions
- timeVaryingUniformFixedValue -> uniformFixedValue
- allows a variety of functions (eg, coded, expressions, tables, ...)
- more similarity to finiteVolume patch type
STYLE: remove unused timeVarying... from etc/controlDict
1) Adding LiquidEvapFuchsKnudsen model for lagrangian evaporation.
This models is based on a diffusion type of evaporation/
condensation on particles composed of solution (liquid + solid).
2) Adding modes of calculating the particle rho and volume change.
The new keyword in constantProperties is 'volumeUpdateMethod'
which three options:
a) constantRho
b) constantVolume
c) updateRhoAndVol
The old keyword 'constantVolume' true/face is still valid
3) The entry rho0 is now optional for multicomponent parcels.
If defined , it is used, but if it is not the actual mixture
provided is used to calculate rho0 of the particle.
T0 is still used as initial T and Cp0 is over-written in the
multicomponent cloud but still required.
4) Adding tutorial for evaporation/condensation model
- slipped in with changes to csvTableReader (commit 59ed3ba18d) so
only affects the 2006 version.
- adjust constructor to expect "componentColumns", but also accept
"valueColumns" as 1912 and earlier-compatibility. This not only
fixes the reported bug, but also ensure proper compatibility with
older files.
ENH: use "refColumn" instead of "timeColumn" for csvTableReader
- consistent with the CSV Function1.
Support 'timeColumn' as 1912 and earlier-compatibility.
TUT: remove unused table-reader entry
