- There will be triangles rendered inside the mesh (when
surface-rendering), because one of the cell's triangles is defined
as a quadrangle in VTK_WEDGE.
- Therefore, this VTK_WEDGE representation is only used when
decomposing the mesh, otherwise the correct representation is done
by VTK_POLYHEDRON.
- Furthermore, using VTK_PYRAMID gave worse result, because it renders
2 triangles inside the mesh for the collapsed quadrangle, likely due
to mismatch with the adjacent cell's face.
- Using VTK_HEXAHEDRON was not tested in this iteration, given that it
should give even worse results, when compared to using VTK_PYRAMID.
Patch contributed by Bruno Santos
Resolves bug-report http://bugs.openfoam.org/view.php?id=2099
- manifest in some parallel operations.
STYLE: update foamToEnsight, foamToEnsightParts to use C++ initializer_list
- avoid warning message when removing a non-existent directory (ensight output).
- Use ensightCase for case writing.
Rebase ensightPartCells/ensightPartFaces on
ensightCells/ensightFaces routines.
- Greatly reduces code duplication potential source of errors.
- eliminate ensightAsciiStream, ensightBinaryStream, ensightStream in
favour of using ensightFile and ensightGeoFile classes throughout.
- encapsulate mesh-parts sorting with the ensightCells, ensightFaces
class.
- handle of patches/faceZones entirely within ensightMesh for a lighter
interaction with field output. Both faceZones and point fields need
more testing to see if they behave properly for all cases.
- move some output functionality into its own namespace
'ensightOutput', move into a library.
- use the ensightCase class to open new ensight output streams
in the proper sub-directory locations.
- Place common code under OSspecific.
By including "endian.H", either one of WM_BIG_ENDIAN or WM_LITTLE_ENDIAN
will be defined.
Provides inline 32-bit and 64-bit byte swap routines that can be
used/re-used elsewhere.
The inplace memory swaps currently used by the VTK output are left for
the moment pending further cleanup of that code.
- Less looping when detecting lagrangian clouds and their fields.
- Avoid using Time::setTime() and IOobjectList in tight loops.
They both kill performance immensely.
ENH: provide a -noLagrangian option to foamToEnsight and foamToEnsightParts
for even more control.
- The new field needs initialization with a dimensioned<Type> not just
the dimensionSet.
- The new field was also incorrectly being registered, which could
cause issues later.
Old code:
Found 10990 time steps
Search for moving mesh ... no moving mesh detected.
Startup in 329.09 s
Updated:
Found 10990 time steps
Search for moving mesh ... no moving mesh detected.
Startup in 1.6 s
- Cause was checking "polyMesh/points" via an IOobject.
Short-circuit with a check for a polyMesh/ directory first.
Limit the check to the master-node as well to further reduce
load on the file-system.
------------------------------
ENH: improve per-step conversion times for foamToEnsight.
Old code:
Converting 11001 time steps
Time [0] = 0 Wrote in 1.53 s
Time [1] = 1 Wrote in 1.52 s
...
Time [100] = 100 Elapsed time 205.35 s
Updated:
Converting 11001 time steps
Time [0] = 0 Wrote in 1.4 s
Time [1] = 1 Wrote in 0.07 s
...
Time [100] = 100 Elapsed time 42.4 s
- Speedup by hashing test results from the first conversion step
instead of checking each time.
Check data on all nodes to avoid problems with incomplete writes.
------------------------------
BUG: moving mesh detection failed for foamToEnsightParts
- adjusted to agree with updated foamToEnsight
------------------------------
Note:
- foamToEnsightParts (serial) still has about twice the throughput of
foamToEnsight.
- Default is a width of 8 characters, but this can be extended up to 31
characters via the '-width' command-line option.
- Now use a similar structure as foamToEnsightParts for the masking.
This reduces the clutter within the directory, makes it easier to
selectively delete some time steps (using shell commands).
- Added in a "time" information data in each sub-directory to
make it possible to reconstruct the case file with an external
script.
- Conversion of cloud data should now also work in parallel
(may need more testing).
- Support binary output for cloud data.
- Better avoidance of illegal ensight variable names.
But still partially incomplete (due to patch fields).
==================================================
Example of NEW file structure:
EnSight/verticalChannel.case # case name
EnSight/geometry # for non-moving geometry
EnSight/data/ # time-varying data
EnSight/data/00000000/
EnSight/data/00000001/
...
Fields are stored by name within the data/********/ directories:
EnSight/data/00000001/time # human-readable time info
EnSight/data/00000001/U
EnSight/data/00000001/p
...
EnSight/data/00000001/geometry # for moving geometry
Clouds are stored at the next sub-directory level:
EnSight/data/00000001/lagrangian/<cloudName>/positions
EnSight/data/00000001/lagrangian/<cloudName>/U
...
==================================================
The old structure was significantly more cluttered:
EnSight/verticalChannel.case
EnSight/verticalChannel.0000.mesh
EnSight/verticalChannel.0001.p
EnSight/verticalChannel.0001.<cloudName>
EnSight/verticalChannel.0001.<cloudName>.U
==================================================
The normal library system() command uses 'fork', which causes
problems on IB+OPENMPI.
STYLE: add Foam:: qualifier to system calls to make them easier to spot.
Replaced the 'postProcess' argument to the 'write' and 'execute'
functions with the single static member 'postProcess' in the
functionObject base-class.
Generally fields and objects are selected using the 'field[s]' and
'object[s]' keywords but this was not consistent between all
functionObject, fvOptions etc. and now fixed by applying the following
renaming:
fieldName -> field
fieldNames -> fields
objectName -> object
objectNames -> objects
the equivalent functionality is provided by the writeRegisteredObject
functionObject in a MUCH simpler, easier and extensible manner.
functionObject: Removed the now redundant 'timeSet' function.
This changes simplifies the specification of functionObjects in
controlDict and is consistent with the 'libs' option in controlDict to
load special solver libraries.
Support for the old 'functionObjectLibs' name is supported for backward compatibility.
- Avoids the need for the 'OutputFilterFunctionObject' wrapper
- Time-control for execution and writing is now provided by the
'timeControlFunctionObject' which instantiates the processing
'functionObject' and controls its operation.
- Alternative time-control functionObjects can now be written and
selected at run-time without the need to compile wrapped version of
EVERY existing functionObject which would have been required in the
old structure.
- The separation of 'execute' and 'write' functions is now formalized in the
'functionObject' base-class and all derived classes implement the
two functions.
- Unnecessary implementations of functions with appropriate defaults
in the 'functionObject' base-class have been removed reducing
clutter and simplifying implementation of new functionObjects.
- The 'coded' 'functionObject' has also been updated, simplified and tested.
- Further simplification is now possible by creating some general
intermediate classes derived from 'functionObject'.
splitMeshRegions: handle flipping of faces for surface fields
subsetMesh: subset dimensionedFields
decomposePar: use run-time selection of decomposition constraints. Used to
keep cells on particular processors. See the decomposeParDict in
$FOAM_UTILITIES/parallel/decomposePar:
- preserveBaffles: keep baffle faces on same processor
- preserveFaceZones: keep faceZones owner and neighbour on same processor
- preservePatches: keep owner and neighbour on same processor. Note: not
suitable for cyclicAMI since these are not coupled on the patch level
- singleProcessorFaceSets: keep complete faceSet on a single processor
- refinementHistory: keep cells originating from a single cell on the
same processor.
decomposePar: clean up decomposition of refinement data from snappyHexMesh
reconstructPar: reconstruct refinement data (refineHexMesh, snappyHexMesh)
reconstructParMesh: reconstruct refinement data (refineHexMesh, snappyHexMesh)
redistributePar:
- corrected mapping surfaceFields
- adding processor patches in order consistent with decomposePar
argList: check that slaves are running same version as master
fvMeshSubset: move to dynamicMesh library
fvMeshDistribute:
- support for mapping dimensionedFields
- corrected mapping of surfaceFields
parallel routines: allow parallel running on single processor
Field: support for
- distributed mapping
- mapping with flipping
mapDistribute: support for flipping
AMIInterpolation: avoid constructing localPoints
to have the prefix 'write' rather than 'output'
So outputTime() -> writeTime()
but 'outputTime()' is still supported for backward-compatibility.
Also removed the redundant secondary-writing functionality from Time
which has been superseded by the 'writeRegisteredObject' functionObject.
for consistency with the time controls in controlDict and to avoid
unnecessary confusion. All code and tutorials have been updated.
The old names 'outputControl' and 'outputInterval' are but supported for
backward compatibility but deprecated.
Description
This functionObject writes objects registered to the database in VTK format
using the foamToVTK library.
Currently only the writing of the cell-values of volFields is supported but
support for other field types, patch fields, Lagrangian data etc. will be
added.
Example of function object specification:
\verbatim
writeVTK1
{
type writeVTK;
functionObjectLibs ("libIOFunctionObjects.so");
...
objectNames (obj1 obj2);
}
\endverbatim
\heading Function object usage
\table
Property | Description | Required | Default value
type | type name: writeVTK | yes |
objectNames | objects to write | yes |
\endtable
These new names are more consistent and logical because:
primitiveField():
primitiveFieldRef():
Provides low-level access to the Field<Type> (primitive field)
without dimension or mesh-consistency checking. This should only be
used in the low-level functions where dimensional consistency is
ensured by careful programming and computational efficiency is
paramount.
internalField():
internalFieldRef():
Provides access to the DimensionedField<Type, GeoMesh> of values on
the internal mesh-type for which the GeometricField is defined and
supports dimension and checking and mesh-consistency checking.
Non-const access to the internal field now obtained from a specifically
named access function consistent with the new names for non-canst access
to the boundary field boundaryFieldRef() and dimensioned internal field
dimensionedInternalFieldRef().
See also commit 22f4ad32b1
The deprecated non-const tmp functionality is now on the compiler switch
NON_CONST_TMP which can be enabled by adding -DNON_CONST_TMP to EXE_INC
in the Make/options file. However, it is recommended to upgrade all
code to the new safer tmp by using the '.ref()' member function rather
than the non-const '()' dereference operator when non-const access to
the temporary object is required.
Please report any problems on Mantis.
Henry G. Weller
CFD Direct.
- most notably the '%' which is used as a separator in places
caused problems.
EHN: only use valid ensight file/variable names for writers
- fixed: foamToEnsightParts, ensightSurfaceWriter
- pending: foamToEnsight
BUG: no geometry written for foamToEnsightParts with moving mesh (fixes#142)
- an incorrect path was causing the issue
Moved file path handling to regIOobject and made it type specific so
now every object can have its own rules. Examples:
- faceZones are now processor local (and don't search up anymore)
- timeStampMaster is now no longer hardcoded inside IOdictionary
(e.g. uniformDimensionedFields support it as well)
- the distributedTriSurfaceMesh is properly processor-local; no need
for fileModificationChecking manipulation.
- checkMesh has option to write faceSets or (outside of) cellSets as
sampledSurface format. It automatically reconstructs the set on the master
and writes it to the postProcessing folder (as any sampledSurface). E.g.
mpirun -np 6 checkMesh -allTopology -allGeometry -writeSets vtk -parallel
- fixed order writing of symmTensor in Ensight writers
- redistributePar to have almost (complete) functionality of decomposePar+reconstructPar
- low-level distributed Field mapping
- support for mapping surfaceFields (including flipping faces)
- support for decomposing/reconstructing refinement data
Conflicts:
applications/solvers/multiphase/twoPhaseEulerFoam/kineticTheoryModels/kineticTheoryModel/kineticTheoryModel.C
applications/utilities/mesh/generation/extrude/extrudeToRegionMesh/createShellMesh.C
applications/utilities/surface/surfaceCheck/surfaceCheck.C
src/finiteVolume/fields/fvPatchFields/derived/advective/advectiveFvPatchField.C
src/finiteVolume/fields/fvPatchFields/derived/waveTransmissive/waveTransmissiveFvPatchField.C
src/meshTools/directMapped/directMappedPolyPatch/directMappedPatchBase.C
NOTE: also needed to strip trailing space/lines in various files
Each collocated set of coupled points has a single master assigned to it.
However when doing mergePoints on a patch the master does not have to be
on the patch. So now it returns mesh point labels, not patch point labels.
Uses globalMeshData::mergePoints to topologically merge mesh points.
Also now require all patches on all processors so cleaned up all code for
handling zero-sized patches.
