Correcting thermoSingleLayer.C mask field alpha to avoid heat sources where there is no film.
Tunning fvSolution for alpha for twoPhasePachuka tutorial
- list all regions from constant/regionProperties:
* foamListRegions
- list specific region type from constant/regionProperties:
* foamListRegions fluid
* foamListRegions solid
Within decomposeParDict, it is now possible to specify a different
decomposition method, methods coefficients or number of subdomains
for each region individually.
The top-level numberOfSubdomains remains mandatory, since this
specifies the number of domains for the entire simulation.
The individual regions may use the same number or fewer domains.
Any optional method coefficients can be specified in a general
"coeffs" entry or a method-specific one, eg "metisCoeffs".
For multiLevel, only the method-specific "multiLevelCoeffs" dictionary
is used, and is also mandatory.
----
ENH: shortcut specification for multiLevel.
In addition to the longer dictionary form, it is also possible to
use a shorter notation for multiLevel decomposition when the same
decomposition method applies to each level.
- the dictionary-driven variant of stitchMesh allows sequential
application of 'stitch' operation with requiring intermediate
writing to disk.
- Without arguments:
* stitchMesh uses a system/stitchMeshDict or -dict dict
- With arguments:
* master/slave patches specified on the command-line as in previous
versions.
- Instead of relying on #inputMode to effect a global change it is now
possible (and recommended) to a temporary change in the inputMode
for the following entry.
#default : provide default value if entry is not already defined
#overwrite : silently remove a previously existing entry
#warn : warn about duplicate entries
#error : error if any duplicate entries occur
#merge : merge sub-dictionaries when possible (the default mode)
This is generally less cumbersome than the switching the global
inputMode. For example to provide a set of fallback values.
#includeIfPresent "user-files"
...
#default value uniform 10;
vs.
#includeIfPresent "user-files"
#inputMode protect
...
value uniform 10;
#inputMode merge // _Assuming_ we actually had this before
These directives can also be used to suppress the normal dictionary
merge semantics:
#overwrite dict { entry val; ... }
Note: performs its own tracking and does not rely on the base
particle::trackXXX functions, and uses a local particle position.
Look to update to barycentric tracking in the future.
The combined solver includes the most advanced and general functionality from
each solver including:
Continuous phase
Lagrangian multiphase parcels
Optional film
Continuous and Lagrangian phase reactions
Radiation
Strong buoyancy force support by solving for p_rgh
The reactingParcelFoam and reactingParcelFilmFoam tutorials have been combined
and updated.
- Arrhenius viscocity model for incompressible viscocity.
- energyTransport FO for incompressible single and multiple phase
flows and viscousDissipation fvOption source.
- Tutorial to show the use of energyTransport:
multiphase/multiphaseInterFoam/laminar/mixerVessel2D
- Tutorial to show viscousDissipation:
compressible/rhoPimpleFoam/RAS/TJunction
Community contribution from Johan Roenby, DHI
IsoAdvector is a geometric Volume-of-Fluid method for advection of a
sharp interface between two incompressible fluids. It works on both
structured and unstructured meshes with no requirements on cell shapes.
IsoAdvector is as an alternative choice for the interface compression
treatment with the MULES limiter implemented in the interFoam family
of solvers.
The isoAdvector concept and code was developed at DHI and was funded
by a Sapere Aude postdoc grant to Johan Roenby from The Danish Council
for Independent Research | Technology and Production Sciences (Grant-ID:
DFF - 1337-00118B - FTP).
Co-funding is also provided by the GTS grant to DHI from the Danish
Agency for Science, Technology and Innovation.
The ideas behind and performance of the isoAdvector scheme is
documented in:
Roenby J, Bredmose H, Jasak H. 2016 A computational method for sharp
interface advection. R. Soc. open sci. 3: 160405.
[http://dx.doi.org/10.1098/rsos.160405](http://dx.doi.org/10.1098/rsos.160405)
Videos showing isoAdvector's performance with a number of standard
test cases can be found in this youtube channel:
https://www.youtube.com/channel/UCt6Idpv4C8TTgz1iUX0prAA
Project contributors:
* Johan Roenby <jro@dhigroup.com> (Inventor and main developer)
* Hrvoje Jasak <hrvoje.jasak@fsb.hr> (Consistent treatment of
boundary faces including processor boundaries, parallelisation,
code clean up
* Henrik Bredmose <hbre@dtu.dk> (Assisted in the conceptual
development)
* Vuko Vukcevic <vuko.vukcevic@fsb.hr> (Code review, profiling,
porting to foam-extend, bug fixing, testing)
* Tomislav Maric <tomislav@sourceflux.de> (Source file
rearrangement)
* Andy Heather <a.heather@opencfd.co.uk> (Integration into OpenFOAM
for v1706 release)
See the integration repository below to see the full set of changes
implemented for release into OpenFOAM v1706
https://develop.openfoam.com/Community/Integration-isoAdvector
Adding special alphaCourantNo for overlaping
Adding bounded term to UEq.H for overInterDyMFoam
Changing to NO_WRITE for the cellMask field
Changing twoSimpleRotors tutorial to open domain
Adds overset discretisation to selected physics:
- diffusion : overLaplacianDyMFoam
- incompressible steady : overSimpleFoam
- incompressible transient : overPimpleDyMFoam
- compressible transient: overRhoPimpleDyMFoam
- two-phase VOF: overInterDyMFoam
The overset method chosen is a parallel, fully implicit implementation
whereby the interpolation (from donor to acceptor) is inserted as an
adapted discretisation on the donor cells, such that the resulting matrix
can be solved using the standard linear solvers.
Above solvers come with a set of tutorials, showing how to create and set-up
simple simulations from scratch.
- Use on/off vs longer compressed/uncompressed.
For consistency, replaced yes/no with on/off.
- Avoid the combination of binary/compressed,
which is disallowed and provokes a warning anyhow
Solver for low Mach no. flows with adiabatic thermodynamics and updated
pressure-velocity coupling given by the RCM interpolation procedure
described in
\verbatim
Knacke, T. (2013).
Potential effects of Rhie & Chow type interpolations in airframe
noise simulations. In: Schram, C., Dénos, R., Lecomte E. (ed):
Accurate and efficient aeroacoustic prediction approaches for
airframe noise, VKI LS 2013-03.
\endverbatim
Original code supplied by Thilo Knacke, CFD E+F GmbH
contact: info@cfd-berlin.com
Integrated into OpenFOAM by OpenCFD Ltd.
