The turbulentTemperatureCoupledBaffleMixed boundary condition
has been superseded by the turbulentTemperatureRadCoupledMixed condition
TUT: injectorPipe: remove an unused entry
TUT: waveMakerFlap: remove uncompressed entry
- marks if the value is considered to be independent of 'x'.
Propagate into PatchFunction1 instead ad hoc checks there.
- adjust method name in PatchFunction1 to 'whichDb()' to reflect
final changes in Function1 method names.
ENH: add a Function1 'none' placeholder function
- This is principally useful for interfaces that expect a Function1
but where it is not necessarily used by a particular submodel.
TUT: update Function1 creation to use objectRegistry
code style and quality improvements
renamed recon::centre to interfaceCentre.{groupName}
ranmed recon::normal to interfaceNormal.{groupName}
centre and normal field are not written by default
- meshTools include/library for many (most) coded items
- add PatchFunction1 include for coded BCs to provide ready access
to Function1 and PatchFunction1
- additional debug information
- improve support for dictionary specification of constant, polynomial
and table entries. These previously only worked properly for
primitiveEntry, which causes confusion.
- extend table Function1 to include TableFile functionality.
Simplifies switching and modifying content.
- overCompressibleInterDyMFoam: Overset solver for two compressible,
non-isothermal, immiscible fluids using a VOF (i.e. volume of fluid)
phase-fraction based interface capturing approach.
- overInterPhaseChangeDyMFoam: Overset solver for two incompressible,
isothermal, immiscible fluids with phase-change (e.g. cavitation) using
VoF (i.e. volume of fluid) phase-fraction based interface capturing approach.
- adds new tutorials:
- multiphase/overCompressibleInterDyMFoam/compressibleTwoSimpleRotors
- multiphase/overInterPhaseChangeDyMFoam/twoSimpleRotors
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
to operate with overset
1) Adding zoneMotion to rigidBodyMotion
2) Introducing PID to prescribedRotation restraint
3) Making drivenLinearMotion read total displacement
4) When drivenLinearMotion is used sixDof and rigid-body solvers
write total displacement
1) PhaseIncompressibleTurbulenceModel class was changed to use
uniform alpha and non-uniform rho templates. This fits the need
of incompressible two phase turbulence models.
2) A new type DPMIncompressibleTurbulenceModel was created for
non-uniform alpha and uniform rho. It is used in single phase flows
in DPM solvers where alpha represents the volumen occupancy.
3) A new type incompressibleRhoTurbulenceModel was created where
non-uniform rho is allowed.
4) A new base templated turbulent class for two-phase VOF named
VoFphaseTurbulentTransportModel was implemented which is created
templating on PhaseIncompressibleTurbulenceModel and
incompressibleRhoTurbulenceModel
5) In order to make the chnage to rho based VOF turbulence a help
class was added incompressibleInterPhaseTransportModel templated
on the mixing.
COMP: fix SP/DP inconsistency in fvGeometryScheme
STYLE: rename polyMesh::updateGeom to polyMesh::updateGeomPoints
- avoids compiler complaints and potential masking of
primitiveMesh::updateGeom / fvMesh::updateGeom
- mark argument as movable, since that is what is happening inside.
GIT: remove merge cruft
TUT: better clean on MPPICInterFoam
Member function dKcdTbyKc in thermo.H is calculated from S and G at Pstd.
Thus dGdT was removed from the thermos.
- Add optional hRef, eRef and Tref as optional.
- Use new thermo to multiphase solver icoReactingMuliPhaseFoam
- Remove hRefConst and eRefConst thermos.
TUT: Updated tutorials
The generalizedNewtonian viscocity models were ported from
the org version and added to the laminar turbulence framework.
This allows use in compressible and incompressible solvers
through the turbulence dictionary under the laminar sub-dictionary.
The thermal laminar viscosity is taken from the thermo for solvers
that use thermo library or from the transportProperties dictionary
for incompressible solvers.
At the moment the option to include viscocity models through the
transportDict is still available.
The icoTabulated equation of state was ported from the org version.
STYLE: use 'model' instead of 'laminarModel' in tutorials
- For slow oscillations it can be more intuitive to specify the
period.
ENH: separate mark/space for Square
- makes it easier to tailor the desired intervals.
BUG: incorrect square wave fraction with negative phase shifts
ENH: additional cosine Function1
STYLE: avoid code duplication by inheriting Cosine/Square from Sine.
