- can be more intuitive to specify for some cases:
rotation
{
type euler;
order rollPitchYaw;
angles (0 20 45);
}
- refactor starcd rotation to reuse Euler ZXY ordering
(code reduction)
ENH: add -rotate-x, -rotate-y, -rotate-z for transformPoints etc
- easier to specify for simple rotations
- ensightWrite, vtkWrite, fv::cellSetOption
ENH: additional topoSet "ignore" action
- this no-op can be used to skip an action step, instead of removing
the entire entry
- in various situations with mesh regions it is also useful to
filter out or remove the defaultRegion name (ie, "region0").
Can now do that conveniently from the polyMesh itself or as a static
function. Simply use this
const word& regionDir = polyMesh::regionName(regionName);
OR mesh.regionName()
instead of
const word& regionDir =
(
regionName != polyMesh::defaultRegion
? regionName
: word::null
);
Additionally, since the string '/' join operator filters out empty
strings, the following will work correctly:
(polyMesh::regionName(regionName)/polyMesh::meshSubDir)
(mesh.regionName()/polyMesh::meshSubDir)
- relocate templating to factory method 'New'.
Adds provisions for more general re-use.
- expose processor topology in globalMesh as topology()
- wrap proc->patch lookup as processorTopology::procPatchLookup method
(failsafe). May consider using Map<label> for its storage in the
future.
- direct construct and reset method for creating a zero-sized (dummy)
subMesh. Has no exposed faces and no parallel synchronization
required.
- core mapping (interpolate) functionality with direct handling
of subsetting in fvMeshSubset (src/finiteVolume).
Does not use dynamicMesh topology changes
- two-step subsetting as fvMeshSubsetter (src/dynamicMesh).
Does use dynamicMesh topology changes.
This is apparently only needed by the subsetMesh application itself.
DEFEATURE: remove deprecated setLargeCellSubset() method
- was deprecated JUL-2018, now removed (see issue #951)
- additional Pstream::broadcasts() method to serialize/deserialize
multiple items.
- revoke the broadcast specialisations for std::string and List(s) and
use a generic broadcasting template. In most cases, the previous
specialisations would have required two broadcasts:
(1) for the size
(2) for the contiguous content.
Now favour reduced communication over potential local (intermediate)
storage that would have only benefited a few select cases.
ENH: refine PstreamBuffers access methods
- replace 'bool hasRecvData(label)' with 'label recvDataCount(label)'
to recover the number of unconsumed receive bytes from specified
processor. Can use 'labelList recvDataCounts()' to recover the
number of unconsumed receive bytes from all processor.
- additional peekRecvData() method (for transcribing contiguous data)
ENH: globalIndex whichProcID - check for isLocal first
- reasonable to assume that local items are searched for more
frequently, so do preliminary check for isLocal before performing
a more costly binary search of globalIndex offsets
ENH: masterUncollatedFileOperation - bundled scatter of status
- bundles frequently used 'gather/scatter' patterns more consistently.
- combineAllGather -> combineGather + broadcast
- listCombineAllGather -> listCombineGather + broadcast
- mapCombineAllGather -> mapCombineGather + broadcast
- allGatherList -> gatherList + scatterList
- reduce -> gather + broadcast (ie, allreduce)
- The allGatherList currently wraps gatherList/scatterList, but may be
replaced with a different algorithm in the future.
STYLE: PstreamCombineReduceOps.H is mostly unneeded now
- when writing surface formats (eg, vtk, ensight etc) the sampled
surfaces merge the faces/points originating from different
processors into a single surface (ie, patch gatherAndMerge).
Previous versions of mergePoints simply merged all points possible,
which proves to be rather slow for larger meshes. This has now been
modified to only consider boundary points, which reduces the number
of points to consider. As part of this change, the reference point
is now always equivalent to the min of the bounding box, which
reduces the number of search loops. The merged points retain their
original order.
- inplaceMergePoints version to simplify use and improve code
robustness and efficiency.
ENH: make PrimitivePatch::boundaryPoints() less costly
- if edge addressing does not already exist, it will now simply walk
the local face edges directly to define the boundary points.
This avoids a rather large overhead of the full faceFaces,
edgeFaces, faceEdges addressing.
This operation is now more important since it is used in the revised
patch gatherAndMerge.
ENH: topological merge for mesh-based surfaces in surfaceFieldValue
- the very old 'writer' class was fully stateless and always templated
on an particular output type.
This is now replaced with a 'coordSetWriter' with similar concepts
as previously introduced for surface writers (#1206).
- writers change from being a generic state-less set of routines to
more properly conforming to the normal notion of a writer.
- Parallel data is done *outside* of the writers, since they are used
in a wide variety of contexts and the caller is currently still in
a better position for deciding how to combine parallel data.
ENH: update sampleSets to sample on per-field basis (#2347)
- sample/write a field in a single step.
- support for 'sampleOnExecute' to obtain values at execution
intervals without writing.
- support 'sets' input as a dictionary entry (as well as a list),
which is similar to the changes for sampled-surface and permits use
of changeDictionary to modify content.
- globalIndex for gather to reduce parallel communication, less code
- qualify the sampleSet results (properties) with the name of the set.
The sample results were previously without a qualifier, which meant
that only the last property value was actually saved (previous ones
overwritten).
For example,
```
sample1
{
scalar
{
average(line,T) 349.96521;
min(line,T) 349.9544281;
max(line,T) 350;
average(cells,T) 349.9854619;
min(cells,T) 349.6589286;
max(cells,T) 350.4967271;
average(line,epsilon) 0.04947733869;
min(line,epsilon) 0.04449639927;
max(line,epsilon) 0.06452856475;
}
label
{
size(line,T) 79;
size(cells,T) 1720;
size(line,epsilon) 79;
}
}
```
ENH: update particleTracks application
- use globalIndex to manage original parcel addressing and
for gathering. Simplify code by introducing a helper class,
storing intermediate fields in hash tables instead of
separate lists.
ADDITIONAL NOTES:
- the regionSizeDistribution largely retains separate writers since
the utility of placing sum/dev/count for all fields into a single file
is questionable.
- the streamline writing remains a "soft" upgrade, which means that
scalar and vector fields are still collected a priori and not
on-the-fly. This is due to how the streamline infrastructure is
currently handled (should be upgraded in the future).
- The keyType is primarily used within dictionary reading, whereas
wordRe and wordRes are used for selectors in code.
Unifying on wordRe and wordRes reduces the number matching options.
- wrap command-line retrieval of fileName with an implicit validate.
Instead of this:
fileName input(args[1]);
fileName other(args["someopt"]);
Now use this:
auto input = args.get<fileName>(1);
auto other = args.get<fileName>("someopt");
which adds a fileName::validate on the inputs
Because of how it is implemented, it will automatically also apply
to argList getOrDefault<fileName>, readIfPresent<fileName> etc.
- adjust fileName::validate and clean to handle backslash conversion.
This makes it easier to ensure that path names arising from MS-Windows
are consistently handled internally.
- dictionarySearch: now check for initial '/' directly instead of
relying on fileName isAbsolute(), which now does more things
BREAKING: remove fileName::clean() const method
- relying on const/non-const to control the behaviour (inplace change
or return a copy) is too fragile and the const version was
almost never used.
Replace:
fileName sanitized = constPath.clean();
With:
fileName sanitized(constPath);
sanitized.clean());
STYLE: test empty() instead of comparing with fileName::null
- simplifies local toggling.
- centralize fileModification static variables into IOobject.
They were previously scattered between IOobject and regIOobject
- eliminates a potentially invalid code branch.
Since it essentially had the same internals as std::swap anyhow,
make that more evident.
ENH: use std::swap for basic types
- makes it clearer that they do not rely on any special semantics
This adds a 'geometry' scheme section to the system/fvSchemes:
geometry
{
type highAspectRatio;
}
These 'fvGeometryMethod's are used to calculate
- deltaCoeffs
- nonOrthoCoeffs
etc and can even modify the basic face/cellCentres calculation.
- (tet, pyr, hex) can be identified from their number of faces
and vertices. For these common shapes can use static `test()`
method instead of the virtual isA() method.
This is much cheaper for calling on an individual basis since
it avoids the overhead of constructing an object.
ENH: tetCell edge/reverseEdge (already had tetEdge)
- add -recentre option to shift points according to the bounding box
centre before performing other operations
- add -auto-origin to use the bounding box centre as the origin for
rotations. Has lower priority than the -origin option.
- surfaceTransformPoints now has distinct -read-scale, -write-scale
options (as per surfaceMeshConvert). Silently accepts -scale as
equivalent to -write-scale, for backwards compatibility and
similarity with transformPoints
- add -steps option for surfaceRefineRedGreen for successive
refinement
