- adds handling of negative start times for masterUncollatedFileOperation
as well (#1112).
- handle failures *after* restoring non-parRun mode.
This ensures exit(FatalError) will exit MPI properly as well.
STYLE: replace "polyMesh" with polyMesh::meshSubDir
STYLE: adjust IOobject read/write enumerated values
- provision for possible bitwise handling
- wrap command-line retrieval of fileName with an implicit validate.
Instead of this:
fileName input(args[1]);
fileName other(args["someopt"]);
Now use this:
auto input = args.get<fileName>(1);
auto other = args.get<fileName>("someopt");
which adds a fileName::validate on the inputs
Because of how it is implemented, it will automatically also apply
to argList getOrDefault<fileName>, readIfPresent<fileName> etc.
- adjust fileName::validate and clean to handle backslash conversion.
This makes it easier to ensure that path names arising from MS-Windows
are consistently handled internally.
- dictionarySearch: now check for initial '/' directly instead of
relying on fileName isAbsolute(), which now does more things
BREAKING: remove fileName::clean() const method
- relying on const/non-const to control the behaviour (inplace change
or return a copy) is too fragile and the const version was
almost never used.
Replace:
fileName sanitized = constPath.clean();
With:
fileName sanitized(constPath);
sanitized.clean());
STYLE: test empty() instead of comparing with fileName::null
- Favour use of argList methods that are more similar to dictionary
method names with the aim of reducing the cognitive load.
* Silently deprecate two-parameter get() method in favour of the
more familiar getOrDefault.
* Silently deprecate opt() method in favour of get()
These may be verbosely deprecated in future versions.
- makes the intent clearer and avoids the need for additional
constructor casting. Eg,
labelList(10, Zero) vs. labelList(10, 0)
scalarField(10, Zero) vs. scalarField(10, scalar(0))
vectorField(10, Zero) vs. vectorField(10, vector::zero)
- nBoundaryFaces() is often used and is identical to
(nFaces() - nInternalFaces()).
- forward the mesh nInternalFaces() and nBoundaryFaces() to
polyBoundaryMesh as nFaces() and start() respectively,
for use when operating on a polyBoundaryMesh.
STYLE:
- use identity() function with starting offset when creating boundary maps.
labelList map
(
identity(mesh.nBoundaryFaces(), mesh.nInternalFaces())
);
vs.
labelList map(mesh.nBoundaryFaces());
forAll(map, i)
{
map[i] = mesh.nInternalFaces() + i;
}
General:
* -roots, -hostRoots, -fileHandler
Specific:
* -to <coordinateSystem> -from <coordinateSystem>
- Display -help-compat when compatibility or ignored options are available
STYLE: capitalization of options text
- The bitSet class replaces the old PackedBoolList class.
The redesign provides better block-wise access and reduced method
calls. This helps both in cases where the bitSet may be relatively
sparse, and in cases where advantage of contiguous operations can be
made. This makes it easier to work with a bitSet as top-level object.
In addition to the previously available count() method to determine
if a bitSet is being used, now have simpler queries:
- all() - true if all bits in the addressable range are empty
- any() - true if any bits are set at all.
- none() - true if no bits are set.
These are faster than count() and allow early termination.
The new test() method tests the value of a single bit position and
returns a bool without any ambiguity caused by the return type
(like the get() method), nor the const/non-const access (like
operator[] has). The name corresponds to what std::bitset uses.
The new find_first(), find_last(), find_next() methods provide a faster
means of searching for bits that are set.
This can be especially useful when using a bitSet to control an
conditional:
OLD (with macro):
forAll(selected, celli)
{
if (selected[celli])
{
sumVol += mesh_.cellVolumes()[celli];
}
}
NEW (with const_iterator):
for (const label celli : selected)
{
sumVol += mesh_.cellVolumes()[celli];
}
or manually
for
(
label celli = selected.find_first();
celli != -1;
celli = selected.find_next()
)
{
sumVol += mesh_.cellVolumes()[celli];
}
- When marking up contiguous parts of a bitset, an interval can be
represented more efficiently as a labelRange of start/size.
For example,
OLD:
if (isA<processorPolyPatch>(pp))
{
forAll(pp, i)
{
ignoreFaces.set(i);
}
}
NEW:
if (isA<processorPolyPatch>(pp))
{
ignoreFaces.set(pp.range());
}
This class is largely a pre-C++11 holdover. It is now possible to
simply use move construct/assignment directly.
In a few rare cases (eg, polyMesh::resetPrimitives) it has been
replaced by an autoPtr.
- use succincter method names that more closely resemble dictionary
and HashTable method names. This improves method name consistency
between classes and also requires less typing effort:
args.found(optName) vs. args.optionFound(optName)
args.readIfPresent(..) vs. args.optionReadIfPresent(..)
...
args.opt<scalar>(optName) vs. args.optionRead<scalar>(optName)
args.read<scalar>(index) vs. args.argRead<scalar>(index)
- the older method names forms have been retained for code compatibility,
but are now deprecated
- constructor for empty cell/face/point Zones, with contents to be
transferred in later.
- ZoneMesh::operator(const word&) to return existing zone or a new empty one.
- this provides a better typesafe means of locating predefined cell
models than relying on strings. The lookup is now ptr() or ref()
directly. The lookup functions behave like on-demand singletons when
loading "etc/cellModels".
Functionality is now located entirely in cellModel but a forwarding
version of cellModeller is provided for API (but not ABI) compatibility
with older existing user code.
STYLE: use constexpr for cellMatcher constants
- use allocator class to wrap the stream pointers instead of passing
them into ISstream, OSstream and using a dynamic cast to delete
then. This is especially important if we will have a bidirectional
stream (can't delete twice!).
STYLE:
- file stream constructors with std::string (C++11)
- for rewind, explicit about in|out direction. This is not currently
important, but avoids surprises with any future bidirectional access.
- combined string streams in StringStream.H header.
Similar to <sstream> include that has both input and output string
streams.
- polyMesh constructor from cell shapes invoked 'removeFiles'.
This may or may not be what the caller wants or expects.
With the ParaView blockMesh viewer, this behaviour causes deletion of
all mesh data (points, faces, etc) when the viewer is refreshed.
Triggered even when just building the blockMesh topology.
- only a few places that construct a polyMesh from cell shapes
(mostly mesh conversion utilities).
Ensure that the file removal (if any) occurs in the application
and *not* as a side-effect of calling the polyMesh constructor.
--
blockMesh (application)
- The placement of the removeFiles seems to also remove freshly
generated sets (Bug or feature to remove sets?)
+-----------------------+---------------+------------------+
| Application | Constructor | removeFiles |
| | (patch info) | new / existing |
+-----------------------+---------------+------------------+
| blockMesh | dictionary | existing |
| ansysToFoam | names | new |
| cfx4ToFoam | dictionary | new |
| fluentMeshToFoam | names | new |
| gambitToFoam | dictionary | new |
| gmshToFoam | names | new |
| ideasUnvToFoam | names | new |
| kivaToFoam | dictionary | new |
| mshToFoam | names | new |
| netgenNeutralToFoam | names | new |
| plot3dToFoam | names | new |
| tetgenToFoam | names | new |
| vtkUnstructuredToFoam | names | new |
+-----------------------+---------------+------------------+
