- use FACE_DATA (was SURFACE_DATA) for similarity with polySurface
ENH: add expression value enumerations and traits
- simple enumeration of standard types (bool, label, scalar, vector)
that can be used as a value type-code for internal bookkeeping.
GIT: relocate pTraits into general traits/ directory
- releases ownership of the pointer. A no-op (and returns nullptr)
for references.
Naming consistent with unique_ptr and autoPtr.
DOC: adjust wording for memory-related classes
- add is_const() method for tmp, refPtr.
Drop (ununsed and confusing looking) isTmp method from refPtr
in favour of is_pointer() or movable() checks
ENH: noexcept for some pTraits methods, remove redundant 'inline'
- test for const first for tmp/refPtr (simpler logic)
- decomposePar: -no-fields to suppress decomposition of fields
- makeFaMesh: -no-decompose to suppress creation of *ProcAddressing
and fields, -no-fields to suppress decomposition of fields only
- switch from default topology merge to point merge if degenerate
blocks are detected. This should alleviate the problems noted in
#1862.
NB: this detection only works for blocks with duplicate vertex
indices, not ones with geometrically duplicate points.
ENH: add patch block/face summary in blockMesh generation
- add blockMesh -verbose option to override the static or dictionary
settings. The -verbose option can be used multiple times to increase
the verbosity.
ENH: extend hexCell handling with more cellShape-type methods
- allows better reuse in blockMesh.
Remove blockMesh-local hex edge definitions that shadowed the
hexCell values.
ENH: simplify some of the block-edge internals
- similar to -dry-run handling, can be interrogated from argList,
which makes it simpler to add into utilities.
- support multiple uses of -dry-run and -verbose to increase the
level. For example, could have
someApplication -verbose -verbose
and inside of the application:
if (args.verbose() > 2) ...
BUG: error with empty distributed roots specification (fixes#2196)
- previously used the size of distributed roots to transmit if the
case was running in distributed mode, but this behaves rather poorly
with bad input. Specifically, the following questionable setup:
distributed true;
roots ( /*none*/ );
Now transmit the ParRunControl distributed() value instead,
and also emit a gentle warning for the user:
WARNING: running distributed but did not specify roots!
- added -dry-run, -write-vtk options.
Additional mesh information after creation.
- add parallel reductions and more information for checkFaMesh
ENH: minor cleanup of faPatch internals
- align pointLabels and pointEdges creation more closely with coding
patterns used in PrimitivePatch
- use fileHandler when loading "S0" field.
- was taking from the current head instead from specified commit-ish
ENH: add -debian=NUM convenience option to foamPackRelease
STYLE: relocate compile begin/end messages
COMP: suppress more clang warnings (needed for boost)
- provide a plain stream() method on messageStream to reduce reliance
on casting operators and slightly opaque operator()() calls etc
- support alternative stream for messageStream serial output.
This can be used to support local redirection of output.
For example,
refPtr<OFstream> logging; // or autoPtr, unique_ptr etc
// Later...
Info.stream(logging.get())
<< "Detailed output ..." << endl;
This will use the stdout semantics in the normal case, or allow
redirection to an output file if a target output stream is defined,
but still effectively use /dev/null on non-master processes.
This is mostly the same as this ternary
(logging ? *logging : Info())
except that the ternary could be incorrect on sub-processes,
requires more typing etc.
ENH: use case-relative names of dictionary, IOstream for FatalIOError
- normally yields more easily understandable information
- argList::envExecutable() static method.
This is identical to getEnv("FOAM_EXECUTABLE"), where the name of
the executable has typically been set from the argList construction.
Provides a singleton access to this value from locations that
do not have knowledge of the originating command args (argList).
This is a similar rationale as for the argList::envGlobalPath() static.
- additional argList::envRelativePath() static method.
- make -dry-run handling more central and easier to use by adding into
argList itself.
STYLE: drop handling of -srcDoc (v1706 option)
- replaced with -doc-source for 1712 and never used much anyhow
- UPstream::mpiGather (MPI_Gather) - used by Pstream::listGatherValues
- UPstream::mpiScatter (MPI_Scatter) - used by Pstream::listScatterValues
These are much simpler forms for gather/scatter of fixed-sized
contiguous types data types (eg, primitives, simple pairs etc).
In the gather form, creates a list of gathered values on the master
process. The subranks have a list size of zero.
Similarly, scatter will distribute a list of values to single values
on each process.
Instead of
labelList sendSizes(Pstream::nProcs());
sendSizes[Pstream::myProcNo()] = sendData.size();
Pstream::gatherList(sendSizes);
Can write
const labelList sendSizes
(
UPstream::listGatherValues<label>(sendData.size())
);
// Less code, lower overhead and list can be const.
For scattering an individual value only,
instead of
labelList someValues;
if (Pstream::master()) someValues = ...;
Pstream::gatherList(sendSizes);
const label localValue
(
someValues[Pstream::myProcNo()]
);
Can write
labelList someValues;
if (Pstream::master()) someValues = ...;
Pstream::gatherList(sendSizes);
const label localValue
(
UPstream::listScatterValues<label>(someValues)
);
Can of course also mix listGatherValues to assemble a list on master
and use Pstream::scatterList to distribute.
ENH: adjusted globalIndex gather methods
- added mpiGather() method [contiguous data only] using MPI_Gatherv
- respect localSize if gathering master data to ensure that a
request for 0 master elements is properly handled.
- the size of a List often requires adjustment prior to an operation,
but old values (if any) are not of interest and will be overwritten.
In these cases can use the _nocopy versions to avoid additional memory
overhead of the intermediate list and the copy/move overhead of
retaining the old values (that we will subsequently discard anyhow).
No equivalent for PtrList/UPtrList - this would be too fragile.
- add swap DynamicField with DynamicList
BUG: fixed Dynamic{Field,List} setCapacity corner case
- for the case when the newly requested capacity coincides with the
current addressable size, the resize of the underlying list would have
been bypassed - ie, the real capacity was not actually changed.
- remove (unused) PtrDynList setCapacity method as too fragile
- previously returned the range slice as a UList,
but this prevents convenient assignment.
Apply similar handling for Field/SubField
Allows the following
labelRange range(...);
fullList.slice(range) = identity(range.size());
and
fullList.slice(range) = UIndirectList<T>(other, addr);
ENH: create SubList from full FixedList (simplifies interface)
- allow default constructed SubList. Use shallowCopy to 'reset' later
- previously used an indirect patch to get the sampling locations,
but this doesn't take account of the face flips. Now use
the faceZone intrinsic for generating a properly flipped patch
and provide the sampling locations separately.
STYLE: adjust compatiblity header for surfaceMeshWriter
- supports redistributePar -decompose -fileHandler collated
- supports redistributePar -reconstruct
- does not support redistributePar with collated in redistribution mode
- noticed by Robin Knowles with `decomposePar -fields -copyZero`
The internals for the Foam:cp method combine the behaviour of
a regular `cp` and `cp -R` combined.
When source and target are both directories, the old implementation
created a subdirectory for the contents.
This normally fine,
ok: cp "path1/0/" to "path2/1" -> "path2/1/2"
BUT: cp "path1/0/" to "path2/0" -> "path2/0/0" !!
Now add check for the basenames first.
If they are identical, we probably meant to copy directory contents
only, without the additional subdir layer.
BUG: decomposePar -fields -copyZero copies the wrong directory
- was using the current time name (usually latest) instead of copying
the 0 directory
ENH: accept 0.orig directories as a fallback to copy if the 0 directory
is missing
- avoid deprecated autoPtr check
- bundle bool values in fvPatchField for compacter allocation
- change useImplicit to a set method taking an argument instead of
allowing direct access.
- support simple mesh subsetting to vtu formats to enable debug output
for a subsection of an existing polyMesh
- rudimentary support for VTK from cellShapes is intended for handling
basic primitive cell shapes without a full blown polyMesh description.
For example,
// Create an empty polyMesh with points only
polyMesh debugMesh
(
io,
std::move(points),
faceList(), // faces
labelList(), // owner
labelList(), // neighbour
true // syncPar
);
// Establish the appropriate VTK sizing for the TET shapes
vtk::vtuCells vtuCells;
vtuCells.resetShapes(debugCutTets);
vtuCells.nPoints(debugMesh.nPoints());
NOTE
Since the vtk::internalMeshWriter only uses the polyMesh reference
for the points, it is also possible to create the vtuCells
description without a pointField (or from a different mesh
description) and write out the connectivity using the pointField
from a different mesh.
- allows reuse similar to refPtr for wrapping different content.
- additional control for when contents are copied back,
instead of waiting for the adaptor to go out of scope.
Eg,
if (adaptor.active())
{
adaptor.commit();
adaptor.clear();
}
- static ConstPrecisionAdaptor::get method renamed to 'select' as a
better description of its purpose and avoid confusion with
non-static 'get' method.
Was previously only used within GAMGPreconditioner, but even there
it is better just to use the ConstPrecisionAdaptor directly.
- support non-uniform scaling, prescaling and cartesian coordinate
transformations.
Eg, stretch in one direction and then rotate
```
prescale (1.5 1 1);
transform
{
origin (0 0 0);
rotation
{
type axisAngle;
axis (0 0 1);
angle 45;
}
}
```
- support "transformed" versions of blockMesh vertices, topology.
With the additional of transformations etc, a simplistic application
of a single scale parameter is no longer sufficient.
new: blMesh.vertices(true);
old: blMesh.vertices() * blMesh.scaleFactor();
new: blMesh.topology(true);
old: N/A
- add individual edge access for blockDescriptor.
Saves copying and duplicate calculations.
- handle '(block face)' specification for curved faces,
which is ok for external block faces, but likely somewhat
questionable if used for internal block faces.
- Can specify
```
transform
{
origin (1 2 3);
rotation none;
}
```
instead of the longer form
```
transform
{
origin (1 2 3);
e1 (1 0 0);
e3 (0 0 1);
}
```
COMPAT: remove old (pre-1812) Euler and STARCD keywords
- use "angles", remove old compat name "rotation"
as clutter and possible confusion with "coordinate rotation"
STYLE: remove coordinate rotation move constructors
- an unnecessary holdover from older code.
