79 lines
2.9 KiB
C++
79 lines
2.9 KiB
C++
/*--------------------------------*- C++ -*----------------------------------*\
|
|
| ========= | |
|
|
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
|
|
| \\ / O peration | Version: v2306 |
|
|
| \\ / A nd | Website: www.openfoam.com |
|
|
| \\/ M anipulation | |
|
|
\*---------------------------------------------------------------------------*/
|
|
FoamFile
|
|
{
|
|
version 2.0;
|
|
format ascii;
|
|
class dictionary;
|
|
object meshQualityDict;
|
|
}
|
|
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
|
|
|
//- Maximum non-orthogonality allowed. Set to 180 to disable.
|
|
maxNonOrtho 65;
|
|
|
|
//- Max skewness allowed. Set to <0 to disable.
|
|
maxBoundarySkewness 20;
|
|
maxInternalSkewness 4;
|
|
|
|
//- Max concaveness allowed. Is angle (in degrees) below which concavity
|
|
// is allowed. 0 is straight face, <0 would be convex face.
|
|
// Set to 180 to disable.
|
|
maxConcave 80;
|
|
|
|
//- Minimum pyramid volume. Is absolute volume of cell pyramid.
|
|
// Set to a sensible fraction of the smallest cell volume expected.
|
|
// Set to very negative number (e.g. -1E30) to disable.
|
|
minVol 1e-13;
|
|
|
|
//- Minimum quality of the tet formed by the face-centre
|
|
// and variable base point minimum decomposition triangles and
|
|
// the cell centre. Set to very negative number (e.g. -1E30) to
|
|
// disable.
|
|
// <0 = inside out tet,
|
|
// 0 = flat tet
|
|
// 1 = regular tet
|
|
minTetQuality 1e-15;
|
|
|
|
//- Minimum face area. Set to <0 to disable.
|
|
minArea -1;
|
|
|
|
//- Minimum face twist. Set to <-1 to disable. dot product of face normal
|
|
// (itself the average of the triangle normals)
|
|
// and face centre triangles normal
|
|
minTwist 0.02;
|
|
|
|
//- Minimum normalised cell determinant. This is the determinant of all
|
|
// the areas of internal faces. It is a measure of how much of the
|
|
// outside area of the cell is to other cells. The idea is that if all
|
|
// outside faces of the cell are 'floating' (zeroGradient) the
|
|
// 'fixedness' of the cell is determined by the area of the internal faces.
|
|
// 1 = hex, <= 0 = folded or flattened illegal cell
|
|
minDeterminant 0.001;
|
|
|
|
//- Relative position of face in relation to cell centres (0.5 for orthogonal
|
|
// mesh) (0 -> 0.5)
|
|
minFaceWeight 0.05;
|
|
|
|
//- Volume ratio of neighbouring cells (0 -> 1)
|
|
minVolRatio 0.01;
|
|
|
|
//- Per triangle normal compared to that of preceding triangle. Must be >0
|
|
// for Fluent compatibility
|
|
minTriangleTwist -1;
|
|
|
|
|
|
//- If >0 : preserve cells with all points on the surface if the
|
|
// resulting volume after snapping (by approximation) is larger than
|
|
// minVolCollapseRatio times old volume (i.e. not collapsed to flat cell).
|
|
// If <0 : delete always.
|
|
//minVolCollapseRatio 0.1;
|
|
|
|
|
|
// ************************************************************************* //
|