- previously introduced `getOrDefault` as a dictionary _get_ method,
now complete the transition and use it everywhere instead of
`lookupOrDefault`. This avoids mixed usage of the two methods that
are identical in behaviour, makes for shorter names, and promotes
the distinction between "lookup" access (ie, return a token stream,
locate and return an entry) and "get" access (ie, the above with
conversion to concrete types such as scalar, label etc).
- adds into the include-quoted search list instead the general (-Idir)
search list.
* makes it less subject to ordering (since it will now generally be
searched first) and makes it less subject to how duplicate removal
is implemented. In some compilers (#1627), the last instance of
a duplicate directory would be used and not the first instance.
* removes clutter in some Make/options files
COMP: add missing linkage libraries
- Eg, with surface writers now in surfMesh, there are fewer libraries
depending on conversion and sampling.
COMP: regularize linkage ordering and avoid some implicit linkage (#1238)
- Global functions are unary or combining binary functions, which are
defined in MinMax.H (MinMaxOps.H).
There are also global reduction functions (gMinMax, gMinMaxMag)
as well as supporting 'Op' classes:
- minMaxOp, minMaxEqOp, minMaxMagOp, minMaxMagEqOp
Since the result of the functions represents a content reduction
into a single MinMax<T> value (a min/max pair), field operations
returning a field simply do not make sense.
- Implemented for lists, fields, field-fields, DimensionedField,
GeometricField (parallel reducing, with boundaries).
- Since the minMax evaluates during its operation, this makes it more
efficient for cases where both min/max values are required since it
avoids looping twice through the data.
* Changed GeometricField writeMinMax accordingly.
ENH: clip as field function
- clipping provides a more efficient, single-pass operation to apply
lower/upper limits on single or multiple values.
Examples,
scalarMinMax limiter(0, 1);
limiter.clip(value)
-> returns a const-ref to the value if within the range, or else
returns the appropriate lower/upper limit
limiter.inplaceClip(value)
-> Modifies the value if necessary to be within lower/upper limit
Function calls
clip(value, limiter)
-> returns a copy after applying lower/upper limit
clip(values, limiter)
-> returns a tmp<Field> of clipped values
- provide a lookupOrDefault constructor form, since this is a fairly
commonly used requirement and simplifies the calling sequence.
Before
dimensionedScalar rhoMax
(
dimensionedScalar::lookupOrDefault
(
"rhoMax",
pimple.dict(),
dimDensity,
GREAT
)
);
After
dimensionedScalar rhoMax("rhoMax", dimDensity, GREAT, pimple.dict());
- read, readIfPresent methods with alternative lookup names.
- Mark the Istream related constructors with compile-time deprecated
warnings.
BUG: read, readIfPresent methods not handling optional dimensions (#1148)
- makes the intent clearer and avoids the need for additional
constructor casting. Eg,
labelList(10, Zero) vs. labelList(10, 0)
scalarField(10, Zero) vs. scalarField(10, scalar(0))
vectorField(10, Zero) vs. vectorField(10, vector::zero)
- for some special cases we wish to mark command-line arguments as
being optional, in order to do our own treatment. For example,
when an arbitrary number of arguments should be allowed.
Now tag this situation with argList::noMandatoryArgs().
The argList::argsMandatory() query can then be used in any further
logic, including the standard default argument checking.
- with the new default check, can consolidate the special-purpose
"setRootCaseNonMandatoryArgs.H"
into the regular
"setRootCase.H"
- revert to a simple "setRootCase.H" and move all the listing related
bits to a "setRootCaseLists.H" file. This leaves the information
available for solvers, or whoever else wishes, without being
introduced everywhere.
- add include guards and scoping to the listing files and rename to
something less generic.
listOptions.H -> setRootCaseListOptions.H
listOutput.H -> setRootCaseListOutput.H
- deprecate dimensionedType constructors using an Istream in favour of
versions accepting a keyword and a dictionary.
Dictionary entries are almost the exclusive means of read
constructing a dimensionedType. By construct from the dictionary
entry instead of doing a lookup() first, we can detect possible
input errors such as too many tokens as a result of a input syntax
error.
Constructing a dimensionedType from a dictionary entry now has
two forms.
1. dimensionedType(key, dims, dict);
This is the constructor that will normally be used.
It accepts entries with optional leading names and/or
dimensions. If the entry contains dimensions, they are
verified against the expected dimensions and an IOError is
raised if they do not correspond. On conclusion, checks the
token stream for any trailing rubbish.
2. dimensionedType(key, dict);
This constructor is used less frequently.
Similar to the previous description, except that it is initially
dimensionless. If entry contains dimensions, they are used
without further verification. The constructor also includes a
token stream check.
This constructor is useful when the dimensions are entirely
defined from the dictionary input, but also when handling
transition code where the input dimensions are not obvious from
the source.
This constructor can also be handy when obtaining values from
a dictionary without needing to worry about the input dimensions.
For example,
Info<< "rho: " << dimensionedScalar("rho", dict).value() << nl;
This will accept a large range of inputs without hassle.
ENH: consistent handling of dimensionedType for inputs (#1083)
BUG: incorrect Omega dimensions (fixes#2084)
- use the dictionary 'get' methods instead of readScalar for
additional checking
Unchecked: readScalar(dict.lookup("key"));
Checked: dict.get<scalar>("key");
- In templated classes that also inherit from a dictionary, an additional
'template' keyword will be required. Eg,
this->coeffsDict().template get<scalar>("key");
For this common use case, the predefined getXXX shortcuts may be
useful. Eg,
this->coeffsDict().getScalar("key");
- instead of dict.lookup(name) >> val;
can use dict.readEntry(name, val);
for checking of input token sizes.
This helps catch certain types of input errors:
{
key1 ; // <- Missing value
key2 1234 // <- Missing ';' terminator
key3 val;
}
STYLE: readIfPresent() instead of 'if found ...' in a few more places.
- avoids compiler ambiguity when virtual methods such as
IOdictionary::read() exist.
- the method was introduced in 1806, and was thus not yet widely used
- relocate some standard functionality to TimePaths to allow a lighter
means of managing time directories without using the entire Time
mechanism.
- optional enableLibs for Time construction (default is on)
and a corresponding argList::noLibs() and "-no-libs" option
STYLE:
- mark Time::outputTime() as deprecated MAY-2016
- use pre-increment for runTime, although there is no difference in
behaviour or performance.
- Since 'bool' and 'Switch' use the _identical_ input mechanism
(ie, both accept true/false, on/off, yes/no, none, 1/0), the main
reason to prefer one or the other is the output.
The output for Switch is as text (eg, "true"), whereas for bool
it is label (0 or 1). If the output is required for a dictionary,
Switch may be appropriate. If the output is not required, or is only
used for Pstream exchange, bool can be more appropriate.
- controlled by the the 'printExecutionFormat' InfoSwitch in
etc/controlDict
// Style for "ExecutionTime = " output
// - 0 = seconds (with trailing 's')
// - 1 = day-hh:mm:ss
ExecutionTime = 112135.2 s ClockTime = 113017 s
ExecutionTime = 1-07:08:55.20 ClockTime = 1-07:23:37
- Callable via the new Time::printExecutionTime() method,
which also helps to reduce clutter in the applications.
Eg,
runTime.printExecutionTime(Info);
vs
Info<< "ExecutionTime = " << runTime.elapsedCpuTime() << " s"
<< " ClockTime = " << runTime.elapsedClockTime() << " s"
<< nl << endl;
--
ENH: return elapsedClockTime() and clockTimeIncrement as double
- previously returned as time_t, which is less portable.
- parsing error state only arises from a missing final newline
in the file (which the dnl macro does not capture).
Report with a warning instead of modifying the dnl macro since
we generally wish to know about this anyhow.
- add missing newline to YEqn.H file.
- The bitSet class replaces the old PackedBoolList class.
The redesign provides better block-wise access and reduced method
calls. This helps both in cases where the bitSet may be relatively
sparse, and in cases where advantage of contiguous operations can be
made. This makes it easier to work with a bitSet as top-level object.
In addition to the previously available count() method to determine
if a bitSet is being used, now have simpler queries:
- all() - true if all bits in the addressable range are empty
- any() - true if any bits are set at all.
- none() - true if no bits are set.
These are faster than count() and allow early termination.
The new test() method tests the value of a single bit position and
returns a bool without any ambiguity caused by the return type
(like the get() method), nor the const/non-const access (like
operator[] has). The name corresponds to what std::bitset uses.
The new find_first(), find_last(), find_next() methods provide a faster
means of searching for bits that are set.
This can be especially useful when using a bitSet to control an
conditional:
OLD (with macro):
forAll(selected, celli)
{
if (selected[celli])
{
sumVol += mesh_.cellVolumes()[celli];
}
}
NEW (with const_iterator):
for (const label celli : selected)
{
sumVol += mesh_.cellVolumes()[celli];
}
or manually
for
(
label celli = selected.find_first();
celli != -1;
celli = selected.find_next()
)
{
sumVol += mesh_.cellVolumes()[celli];
}
- When marking up contiguous parts of a bitset, an interval can be
represented more efficiently as a labelRange of start/size.
For example,
OLD:
if (isA<processorPolyPatch>(pp))
{
forAll(pp, i)
{
ignoreFaces.set(i);
}
}
NEW:
if (isA<processorPolyPatch>(pp))
{
ignoreFaces.set(pp.range());
}
- when constructing dimensioned fields that are to be zero-initialized,
it is preferrable to use a form such as
dimensionedScalar(dims, Zero)
dimensionedVector(dims, Zero)
rather than
dimensionedScalar("0", dims, 0)
dimensionedVector("zero", dims, vector::zero)
This reduces clutter and also avoids any suggestion that the name of
the dimensioned quantity has any influence on the field's name.
An even shorter version is possible. Eg,
dimensionedScalar(dims)
but reduces the clarity of meaning.
- NB: UniformDimensionedField is an exception to these style changes
since it does use the name of the dimensioned type (instead of the
regIOobject).
- in many cases can just use lookupOrDefault("key", bool) instead of
lookupOrDefault<bool> or lookupOrDefault<Switch> since reading a
bool from an Istream uses the Switch(Istream&) anyhow
STYLE: relocated Switch string names into file-local scope
- eliminate iterators from PackedList since they were unused, had
lower performance than direct access and added unneeded complexity.
- eliminate auto-vivify for the PackedList '[] operator.
The set() method provides any required auto-vivification and
removing this ability from the '[]' operator allows for a lower
when accessing the values. Replaced the previous cascade of iterators
with simpler reference class.
PackedBoolList:
- (temporarily) eliminate logic and addition operators since
these contained partially unclear semantics.
- the new test() method tests the value of a single bit position and
returns a bool without any ambiguity caused by the return type
(like the get() method), nor the const/non-const access (like
operator[] has). The name corresponds to what std::bitset uses.
- more consistent use of PackedBoolList test(), set(), unset() methods
for fewer operation and clearer code. Eg,
if (list.test(index)) ... | if (list[index]) ...
if (!list.test(index)) ... | if (list[index] == 0u) ...
list.set(index); | list[index] = 1u;
list.unset(index); | list[index] = 0u;
- deleted the operator=(const labelUList&) and replaced with a setMany()
method for more clarity about the intended operation and to avoid any
potential inadvertent behaviour.
This class is largely a pre-C++11 holdover. It is now possible to
simply use move construct/assignment directly.
In a few rare cases (eg, polyMesh::resetPrimitives) it has been
replaced by an autoPtr.
Improve alignment of its behaviour with std::unique_ptr
- element_type typedef
- release() method - identical to ptr() method
- get() method to get the pointer without checking and without releasing it.
- operator*() for dereferencing
Method name changes
- renamed rawPtr() to get()
- renamed rawRef() to ref(), removed unused const version.
Removed methods/operators
- assignment from a raw pointer was deleted (was rarely used).
Can be convenient, but uncontrolled and potentially unsafe.
Do allow assignment from a literal nullptr though, since this
can never leak (and also corresponds to the unique_ptr API).
Additional methods
- clone() method: forwards to the clone() method of the underlying
data object with argument forwarding.
- reset(autoPtr&&) as an alternative to operator=(autoPtr&&)
STYLE: avoid implicit conversion from autoPtr to object type in many places
- existing implementation has the following:
operator const T&() const { return operator*(); }
which means that the following code works:
autoPtr<mapPolyMesh> map = ...;
updateMesh(*map); // OK: explicit dereferencing
updateMesh(map()); // OK: explicit dereferencing
updateMesh(map); // OK: implicit dereferencing
for clarity it may preferable to avoid the implicit dereferencing
- prefer operator* to operator() when deferenced a return value
so it is clearer that a pointer is involve and not a function call
etc Eg, return *meshPtr_; vs. return meshPtr_();
The combustion and chemistry models no longer select and own the
thermodynamic model; they hold a reference instead. The construction of
the combustion and chemistry models has been changed to require a
reference to the thermodyanmics, rather than the mesh and a phase name.
At the solver-level the thermo, turbulence and combustion models are now
selected in sequence. The cyclic dependency between the three models has
been resolved, and the raw-pointer based post-construction step for the
combustion model has been removed.
The old solver-level construction sequence (typically in createFields.H)
was as follows:
autoPtr<combustionModels::psiCombustionModel> combustion
(
combustionModels::psiCombustionModel::New(mesh)
);
psiReactionThermo& thermo = combustion->thermo();
// Create rho, U, phi, etc...
autoPtr<compressible::turbulenceModel> turbulence
(
compressible::turbulenceModel::New(rho, U, phi, thermo)
);
combustion->setTurbulence(*turbulence);
The new sequence is:
autoPtr<psiReactionThermo> thermo(psiReactionThermo::New(mesh));
// Create rho, U, phi, etc...
autoPtr<compressible::turbulenceModel> turbulence
(
compressible::turbulenceModel::New(rho, U, phi, *thermo)
);
autoPtr<combustionModels::psiCombustionModel> combustion
(
combustionModels::psiCombustionModel::New(*thermo, *turbulence)
);
ENH: combustionModel, chemistryModel: Simplified model selection
The combustion and chemistry model selection has been simplified so
that the user does not have to specify the form of the thermodynamics.
Examples of new combustion and chemistry entries are as follows:
In constant/combustionProperties:
combustionModel PaSR;
combustionModel FSD;
In constant/chemistryProperties:
chemistryType
{
solver ode;
method TDAC;
}
All the angle bracket parts of the model names (e.g.,
<psiThermoCombustion,gasHThermoPhysics>) have been removed as well as
the chemistryThermo entry.
The changes are mostly backward compatible. Only support for the
angle bracket form of chemistry solver names has been removed. Warnings
will print if some of the old entries are used, as the parts relating to
thermodynamics are now ignored.
ENH: combustionModel, chemistryModel: Simplified model selection
Updated all tutorials to the new format
STYLE: combustionModel: Namespace changes
Wrapped combustion model make macros in the Foam namespace and removed
combustion model namespace from the base classes. This fixes a namespace
specialisation bug in gcc 4.8. It is also somewhat less verbose in the
solvers.
This resolves bug report https://bugs.openfoam.org/view.php?id=2787
ENH: combustionModels: Default to the "none" model
When the constant/combustionProperties dictionary is missing, the solver
will now default to the "none" model. This is consistent with how
radiation models are selected.
and replaced rhoPimpleDyMFoam with a script which reports this change.
The rhoPimpleDyMFoam tutorials have been moved into the rhoPimpleFoam directory.
This change is the first of a set of developments to merge dynamic mesh
functionality into the standard solvers to improve consistency, usability,
flexibility and maintainability of these solvers.
Henry G. Weller
CFD Direct Ltd.
rhoReactingFoam: Updated for changes to rhoPimpleFoam files
