The blendingFactor function object overwrites the DEShybrid:Factor
field internally when blendedSchemeBase debug flag is active.
However, users are allowed to write out the original DEShybrid:Factor
field by executing the writeObjects function object before
any blendingFactor function object execution.
- direct construct and reset method for creating a zero-sized (dummy)
subMesh. Has no exposed faces and no parallel synchronization
required.
- core mapping (interpolate) functionality with direct handling
of subsetting in fvMeshSubset (src/finiteVolume).
Does not use dynamicMesh topology changes
- two-step subsetting as fvMeshSubsetter (src/dynamicMesh).
Does use dynamicMesh topology changes.
This is apparently only needed by the subsetMesh application itself.
DEFEATURE: remove deprecated setLargeCellSubset() method
- was deprecated JUL-2018, now removed (see issue #951)
- allows restricted evaluation to specific coupled patch types.
Code relocated/refactored from redistributePar.
STYLE: ensure use of waitRequests() also corresponds to nonBlocking
ENH: additional copy/move construct GeometricField from DimensionedField
STYLE: processorPointPatch owner()/neighbour() as per processorPolyPatch
STYLE: orientedType with bool cast operator and noexcept
- move construct from components. Construct with optional IO control
- separate init() method (as per polyMesh) to delay evaluation of
globalData and base geometry.
- faMesh removeFiles method
ENH: faBoundaryMeshEntries for reading faBoundary files without a mesh
ENH: adjust debug output for {fa,fae,fv,fvs}patchField::New
- add alternative constraint type selection for faePatchField.
- unify handling of "patchType" reading.
Make less noisy when reporting dictionary defaults.
- allows reuse by finiteArea, for example.
- simplify edge looping with face thisLabel/nextLabel method
ENH: additional storage checks for mesh weights (faMesh + fvMesh)
- allow finite-area field decomposition without edge weights.
STYLE: use tmp New in various places. Simpler updateGeom check
STYLE: remove spurious (no-op) processor boundary evaluations
- boundary fields for faceAreaCentres and edgeCentres had no-op
initEvaluate/evaluate pair on processor boundaries.
Now consistent with each other and with how finiteVolume is defined.
STYLE: add comments about which private methods trigger communication
- reduce the amount of communication when checking zones and patches
by performing the synchonization check on the gathered strings
(master only) and reduce or broadcast the result.
STYLE: simplify coupled() checks depending only on parRun
* lessEqOp -> lessEqualOp
* greaterEqOp -> greaterEqualOp
to avoid ambiguitity with other forms such as 'plusEqOp' where the
'Eq' implies an assigment. The name change also aligns better with
C++ <functional> names such as std::less_equal, std::greater_equal
ENH: simple labelRange predicates gt0/ge0/lt0/le0
- mirrors scalarRange tests.
Lower overhead than using labelMinMax::ge(0) etc since it does not
create an intermediate (is stateless) and can be used as a constexpr
- was in fvMotionSolver, but only requires PatchFunction1 capabilities
(from within meshTools).
GIT: relocate IOmapDistributePolyMesh (from dynamicMesh to OpenFOAM)
- adds handling of negative start times for masterUncollatedFileOperation
as well (#1112).
- handle failures *after* restoring non-parRun mode.
This ensures exit(FatalError) will exit MPI properly as well.
STYLE: replace "polyMesh" with polyMesh::meshSubDir
STYLE: adjust IOobject read/write enumerated values
- provision for possible bitwise handling
- additional Pstream::broadcasts() method to serialize/deserialize
multiple items.
- revoke the broadcast specialisations for std::string and List(s) and
use a generic broadcasting template. In most cases, the previous
specialisations would have required two broadcasts:
(1) for the size
(2) for the contiguous content.
Now favour reduced communication over potential local (intermediate)
storage that would have only benefited a few select cases.
ENH: refine PstreamBuffers access methods
- replace 'bool hasRecvData(label)' with 'label recvDataCount(label)'
to recover the number of unconsumed receive bytes from specified
processor. Can use 'labelList recvDataCounts()' to recover the
number of unconsumed receive bytes from all processor.
- additional peekRecvData() method (for transcribing contiguous data)
ENH: globalIndex whichProcID - check for isLocal first
- reasonable to assume that local items are searched for more
frequently, so do preliminary check for isLocal before performing
a more costly binary search of globalIndex offsets
ENH: masterUncollatedFileOperation - bundled scatter of status
Eg,
export WM_COMPILER=Clang130
export WM_COMPILE_CONTROL="version=13.0 +lld"
- also support the mold linker (+mold) for clang
STYLE: report as 'link' stage instead of 'ld' in short messages
- use vector::removeCollinear a few places
COMP: incorrect initialization order in edgeFaceCirculator
COMP: Silence boost bind deprecation warnings (before CGAL-5.2.1)
- for most field types this is a no-op, but for a field of floatVector
or doubleVector (eg, vector and solveVector) it will normalise each
element with divide-by-zero protection.
More reliable and efficient than dividing a field by the mag of itself
(even with VSMALL protection).
Applied to FieldField and GeometricField as well.
Eg,
fld.normalise();
vs.
fld /= mag(fld) + VSMALL;
ENH: support optional tolerance for vector::normalise
- for cases where tolerances larger than ROOTVSMALL are preferable.
Not currently available for the field method (a templating question).
ENH: vector::removeCollinear method
- when working with geometries it is frequently necessary to have a
normal vector without any collinear components. The removeCollinear
method provides for clearer, compacter code.
Eg,
vector edgeNorm = ...;
const vector edgeDirn = e.unitVec(points());
edgeNorm.removeCollinear(edgeDirn);
edgeNorm.normalise();
vs.
vector edgeNorm = ...;
const vector edgeDirn = e.unitVec(points());
edgeNorm -= edgeDirn*(edgeDirn & edgeNorm);
edgeNorm /= mag(edgeNorm);
- for obtaining set entries from a boolList
- BitOps::select to mirror bitSet constructor but returning a boolList
- BitOps::set/unset for boolList
ENH: construct bitSet from a labelRange
- useful, for example, when marking up patch slices
ENH: ListOps methods
- ListOps::count_if to mirror std::count_if but with list indexing.
- ListOps::find_if to mirror std::find_if but with list indexing.
ENH: UPtrList::test() method.
- includes bounds checks, which means it can be used in more places
(eg, even if the storage is empty).
Previous commit solved: "mixture rho to volume-based in rhoThermo."
This proved to work correctly for rho=constant EoS but not for
idealGas. Fixes#2304. The previous gitlab issue was #1812.
- `functions<scalar>` and `functions<vector>` were erroneously
documented in header as `lookup<scalar>` etc.
INT: handle fluent square brackets (fixes#2429)
- patch applied from openfoam.org
- support direct processing of CompactListList instead of requiring
a conversion to labelListList for bandCompression and renumbering
methods.
- manage FIFO with CircularBuffer instead of SLList (avoids
allocations in inner loops). Invert logic to use a bitSet of
unvisited cells, which improves looping as the matrix becomes more
sparse.
- fix missed weighting in bandCompression (same as #1376).
In polyTopoChange, handle removed cells immediately to simplify
the logic and align more closely with bandCompression.
STYLE: enclose bandCompression within meshTools namespace
ENH: PrimitivePatch pointFaces with DynamicList instead of SLList
- MPI_Gatherv requires contiguous data, but a byte-wise transfer can
quickly exceed the 'int' limits used for MPI sizes/offsets. Thus
gather label/scalar components when possible to increase the
effective size limit.
For non-contiguous types (or large contiguous data) now also
reverts to manual handling
ENH: handle contiguous data in GAMGAgglomeration gather values
- delegate to globalIndex::gatherValues static method (new)
- bundles frequently used 'gather/scatter' patterns more consistently.
- combineAllGather -> combineGather + broadcast
- listCombineAllGather -> listCombineGather + broadcast
- mapCombineAllGather -> mapCombineGather + broadcast
- allGatherList -> gatherList + scatterList
- reduce -> gather + broadcast (ie, allreduce)
- The allGatherList currently wraps gatherList/scatterList, but may be
replaced with a different algorithm in the future.
STYLE: PstreamCombineReduceOps.H is mostly unneeded now
STYLE: LduInterfaceFieldPtrsList as alias instead of a class
STYLE: define patch lists typedefs when defining the base patch
- eg, polyPatchList typedef within polyPatch.H
INT: relocate GeometricField::Boundary -> GeometricBoundaryField
- was internal to GeometricField but moving it outside simplifies
forward declarations etc. Code adapted from openfoam.org
