- this largely reverts 3f0f218d88 and 4ee65d12c4.
Consistent addressing with support for wrapped pointer types (eg,
autoPtr, std::unique_ptr) has proven to be less robust than desired.
Thus rescind HashTable iterator '->' dereferencing (from APR-2019).
- change contiguous from a series of global functions to separate
templated traits classes:
- is_contiguous
- is_contiguous_label
- is_contiguous_scalar
The static constexpr 'value' and a constexpr conversion operator
allow use in template expressions. The change also makes it much
easier to define general traits and to inherit from them.
The is_contiguous_label and is_contiguous_scalar are special traits
for handling data of homogeneous components of the respective types.
- adjust naming of quaternion 'rotationSequence' to be 'eulerOrder'
to reflect its purpose.
- provide rotation matrices directly for these rotation orders in
coordinateRotations::euler for case in which the rotation tensor
is required but not a quaternion.
- Eg, with surface writers now in surfMesh, there are fewer libraries
depending on conversion and sampling.
COMP: regularize linkage ordering and avoid some implicit linkage (#1238)
- remove writeGeometry() in favour of write() and make it pure virtual
so that all writers must explicitly deal with it.
- establish proxy extension at construction time and treated as an
invariant thereafter. This avoids potentially surprising changes in
behaviour when writing.
- While a rectilinear mesh can be created with blockMesh, not every mesh
created with blockMesh will satisfy the requirements for being a
rectilinear mesh.
This alternative to blockMesh uses a single block that is aligned
with the xy-z directions and specifications of the control points,
mesh divisions and expansion ratios. For example,
x
{
points ( -13.28 -0.10 6.0 19.19 );
nCells ( 10 12 10 );
ratios ( 0.2 1 5 );
}
y { ... }
z { ... }
With only one block, the boundary patch definition is simple and the
canonical face number is used directly. For example,
inlet
{
type patch;
faces ( 0 );
}
outlet
{
type patch;
faces ( 1 );
}
sides
{
type patch;
faces ( 2 3 );
}
...
- After a mesh is defined, it is trivial to retrieve mesh-related
information such as cell-volume, cell-centres for any i-j-k location
without an actual polyMesh.
STYLE: remove -noFunctionObjects from blockMesh
- no time loop, so function objects cannot be triggered anyhow.
- The writers have changed from being a generic state-less set of
routines to more properly conforming to the normal notion of a writer.
These changes allow us to combine output fields (eg, in a single
VTK/vtp file for each timestep).
Parallel data reduction and any associated bookkeeping is now part
of the surface writers.
This improves their re-usability and avoids unnecessary
and premature data reduction at the sampling stage.
It is now possible to have different output formats on a per-surface
basis.
- A new feature of the surface sampling is the ability to "store" the
sampled surfaces and fields onto a registry for reuse by other
function objects.
Additionally, the "store" can be triggered at the execution phase
as well
- changed the sectorCoeffs keyword to 'point' from 'axisPt'
for more similarity with other dictionaries.
Continue to accept 'axisPt' for compatibility.
- a valid() method (same as !empty() call) for consistency with other
containers and data types
- a centre() method (same as midpoint() method) for consistency with
other OpenFOAM geometric entities
- fixed some more places with an explicit AUTO_WRITE.
BUG: revert handling of the readOption. It should not be NO_READ.
In cases where the user a IOobject without specifying read/write, it
defaults to NO_READ anyhow. However, the move constructor can also
be called with empty lists and a read option. This has the same
signature, but obviously will not work with NO_READ.
- makes the intent clearer and avoids the need for additional
constructor casting. Eg,
labelList(10, Zero) vs. labelList(10, 0)
scalarField(10, Zero) vs. scalarField(10, scalar(0))
vectorField(10, Zero) vs. vectorField(10, vector::zero)
- for some special cases we wish to mark command-line arguments as
being optional, in order to do our own treatment. For example,
when an arbitrary number of arguments should be allowed.
Now tag this situation with argList::noMandatoryArgs().
The argList::argsMandatory() query can then be used in any further
logic, including the standard default argument checking.
- with the new default check, can consolidate the special-purpose
"setRootCaseNonMandatoryArgs.H"
into the regular
"setRootCase.H"
- revert to a simple "setRootCase.H" and move all the listing related
bits to a "setRootCaseLists.H" file. This leaves the information
available for solvers, or whoever else wishes, without being
introduced everywhere.
- add include guards and scoping to the listing files and rename to
something less generic.
listOptions.H -> setRootCaseListOptions.H
listOutput.H -> setRootCaseListOutput.H
- now placed under postProcessing/checkMesh and postProcessing/checkAMI,
respectively.
Output files are now also tagged with the id of the patch, in case
there are multiple AMI patches in use.
- can be used, for example, to visualize all wall cells - for quality
or other purposes - without requiring an intermediate faceSet for
the selection. Request arising from pending merge !213.
- helps reduce clutter in the topoSetDict files.
Caveats when using this.
The older specification styles using "name" will conflict with the
set name. Eg,
{
name f0
type faceSet;
action add;
source patchToFace;
sourceInfo
{
name inlet;
}
}
would flattened to the following
{
name f0
type faceSet;
action add;
source patchToFace;
name inlet;
}
which overwrites the "name" used for the faceSet.
The solution is to use the updated syntax:
{
name f0
type faceSet;
action add;
source patchToFace;
patch inlet;
}
- now applicable to labelLists.
Note:
in some situations it will be more efficient to use
Foam::identity() directly. Eg,
globalIndex globalCells(mesh.nCells());
...
labelList cellIds
(
identity(globalCells.localSize(), globalCells.localStart())
);
- old 'DELETE' enum was easily confused with 'REMOVE', which removes
the set, not the elements from the set.
- provide corresponding subtractSet() method
STYLE: HashSet set/unset instead of insert/erase methods in topoSetSource
- simplifies switching to/from bitSet storage
- as part of the cleanup of dictionary access methods (c6520033c9)
made the dictionary class single inheritance from IDLList<entry>.
This eliminates any ambiguities for iterators and allows
for simple use of range-for looping.
Eg,
for (const entry& e : topDict))
{
Info<< "entry:" << e.keyword() << " is dict:" << e.isDict() << nl;
}
vs
forAllConstIter(dictionary, topDict, iter))
{
Info<< "entry:" << iter().keyword()
<< " is dict:" << iter().isDict() << nl;
}
- more dictionary-like methods, enforce keyType::LITERAL for all
lookups to avoid any spurious keyword matching.
- new readEntry, readIfPresent methods
- The get() method replaces the now deprecate lookup() method.
- Deprecate lookupOrFailsafe()
Failsafe behaviour is now an optional parameter for lookupOrDefault,
which makes it easier to tailor behaviour at runtime.
- output of the names is now always flatted without line-breaks.
Thus,
os << flatOutput(someEnumNames.names()) << nl;
os << someEnumNames << nl;
both generate the same output.
- Constructor now uses C-string (const char*) directly instead of
Foam::word in its initializer_list.
- Remove special enum + initializer_list constructor form since
it can create unbounded lookup indices.
- Removd old hasEnum, hasName forms that were provided during initial
transition from NamedEnum.
- Added static_assert on Enum contents to restrict to enum or
integral values. Should not likely be using this class to enumerate
other things since it internally uses an 'int' for its values.
Changed volumeType accordingly to enumerate on its type (enum),
not the class itself.
- use keyType::option enum to consolidate searching options.
These enumeration names should be more intuitive to use
and improve code readability.
Eg, lookupEntry(key, keyType::REGEX);
vs lookupEntry(key, false, true);
or
Eg, lookupEntry(key, keyType::LITERAL_RECURSIVE);
vs lookupEntry(key, true, false);
- new findEntry(), findDict(), findScoped() methods with consolidated
search options for shorter naming and access names more closely
aligned with other components. Behave simliarly to the
methods lookupEntryPtr(), subDictPtr(), lookupScopedEntryPtr(),
respectively. Default search parameters consistent with lookupEntry().
Eg, const entry* e = dict.findEntry(key);
vs const entry* e = dict.lookupEntryPtr(key, false, true);
- added '*' and '->' dereference operators to dictionary searchers.
- use the dictionary 'get' methods instead of readScalar for
additional checking
Unchecked: readScalar(dict.lookup("key"));
Checked: dict.get<scalar>("key");
- In templated classes that also inherit from a dictionary, an additional
'template' keyword will be required. Eg,
this->coeffsDict().template get<scalar>("key");
For this common use case, the predefined getXXX shortcuts may be
useful. Eg,
this->coeffsDict().getScalar("key");
- same as !isPattern(), but can be more readable.
- add wordRe enum state 'UNKNOWN', which has the identical value as
'DETECT' but used for a return value.
- instead of dict.lookup(name) >> val;
can use dict.readEntry(name, val);
for checking of input token sizes.
This helps catch certain types of input errors:
{
key1 ; // <- Missing value
key2 1234 // <- Missing ';' terminator
key3 val;
}
STYLE: readIfPresent() instead of 'if found ...' in a few more places.
- nBoundaryFaces() is often used and is identical to
(nFaces() - nInternalFaces()).
- forward the mesh nInternalFaces() and nBoundaryFaces() to
polyBoundaryMesh as nFaces() and start() respectively,
for use when operating on a polyBoundaryMesh.
STYLE:
- use identity() function with starting offset when creating boundary maps.
labelList map
(
identity(mesh.nBoundaryFaces(), mesh.nInternalFaces())
);
vs.
labelList map(mesh.nBoundaryFaces());
forAll(map, i)
{
map[i] = mesh.nInternalFaces() + i;
}
Previously had 3 possibilities for handling exposed internal faces
1. use default "oldInternalFaces"
2. specify -patch, to use the specified (existing) patch
3. specify -patches, to use the geometrically closest patches
Now relaxed the restriction on -patch to allow specification of a new
(not yet existing) patch name. This improves flexibility, but won't
catch typing mistakes.
Harmonize behaviour of -patches and -patch. When -patches is used to
specify a single, non-regex patch name, it now behaves identically to
-patch. Since the getList handling for options already allows special
treatment for single parameter lists, the following will work
identically:
subsetMesh -patch patch0
subsetMesh -patches patch0
subsetMesh -patches '( patch0 )'
In the future it might be reasonable to fully combine the behaviour of
'-patch' and '-patches' and treat them as aliases for each other.
ENH: support subsetMesh on a cellZone.
- when the '-zone' option is specified, the command argument is treated
as the name (or names) of cellZones to be selected instead of as the
name of the cellSet.
The command argument can be a single word, regex, or list of
word/regex.
Eg,
subsetMesh -zone -patch mypatch mixer
subsetMesh -zone -patch mypatch '(mixer "moving.*" )'
STYLE: simplify set handling and other code cleanup in subsetMesh
This method waits until all the threads have completed IO operations and
then clears any cached information about the files on disk. This
replaces the deactivation of threading by means of zeroing the buffer
size when writing and reading of a file happen in sequence. It also
allows paraFoam to update the list of available times.
Patch contributed by Mattijs Janssens
Resolves bug report https://bugs.openfoam.org/view.php?id=2962
- there were previously no hashing mechanisms for lists so they
would fall back to the definition for primitives and hash the
memory location of the allocated List object.
- provide a UList::Hash<> sub-class for inheritance, and also a global
specialization for UList<T>, List<T> such that the hash value for
List<List<T>> cascades properly.
- provide similar function in triFace to ensure that it remains
similar in behaviour to face.
- added SymmHash to Pair, for use when order is unimportant.
STYLE: use string::hash() more consistently
- no particular reason to use Hash<word>() which forwards to
string::hash() anyhow
- With argList::noFunctionObjects() we use the logic added in
4b93333292 (issue #352)
By removing the '-noFunctionObjects' option, we automatically
suppress the creation of function-objects via Time (with argList
as a parameter).
There is generally no need in these cases for an additional
runTime.functionObjects().off() statement
Use the argList::noFunctionObjects() for more direct configuration
and reduce unnecessary clutter in the -help information.
In previous versions, the -noFunctionObjects would have been redundant
anyhow, so we can also just ignore it now instead.
- signedDistance() method is like distance() but retains
the positive/negative sign for the side of the plane.
- the sign() method returns the sign as -1,0,+1 integer for
classification purposes where it is important to distinguish between
a zero value and a positive value (eg, for cutting). Optional
tolerance can be supplied to round for zero.
- refactor and inlined simple and frequently used methods.
- add boundBox faceCentre() method, which can be useful for creating
clipping planes from a bounding box.
Relocated treeBoundBox faceNormals to boundBox since they apply
equally there - the meaning of the faces (x-min, x-max, etc)
is the same, even if the point addressing for the faces differs.
- centralizes IOobject handling and treatment of alternative locations.
If an alternative file location is specified, it will be used instead.
- provide decompositionMethod::canonicalName instead of using
"decomposeParDict" in various places.
General:
* -roots, -hostRoots, -fileHandler
Specific:
* -to <coordinateSystem> -from <coordinateSystem>
- Display -help-compat when compatibility or ignored options are available
STYLE: capitalization of options text
- simplifies usage.
Support syncPar check on names() to detect inconsistencies.
- simplify readFields, ReadFields and other routines by using these
new methods.
- what was previously termed 'setLargeCellSubset()' is now simply
'setCellSubset()' and supports memory efficient interfaces.
The new parameter ordering avoids ambiguities caused by default
parameters.
Old parameter order:
setLargeCellSubset
(
const labelList& region,
const label currentRegion,
const label patchID = -1,
const bool syncCouples = true
);
New parameter order:
setCellSubset
(
const label regioni,
const labelUList& regions,
const label patchID = -1,
const bool syncCouples = true
);
And without ambiguity:
setCellSubset
(
const labelUList& selectedCells,
const label patchID = -1,
const bool syncCouples = true
);
- support bitSet directly for specifying the selectedCells for
memory efficiency and ease of use.
- Additional constructors to perform setCellSubset() immediately,
which simplifies coding.
For example,
meshParts.set
(
zonei,
new fvMeshSubset(mesh, selectedCells)
);
Or even
return autoPtr<fvMeshSubset>::New(mesh, selectedCells);
- The -rotate-angle option allows convenient specification of a
rotation about an arbitrary axis. Eg, -rotate-angle '((1 1 1) 45)'
- The -origin option can be used to temporarily shift the origin
for the rotation operations. For example,
-origin '(0 0 1)' -rotate-angle '((1 0 0) 180)'
for mirroring.
- aids with detection of excess tokens (issue #762)
- deprecated dictionary::operator[] in favour of the lookup() method
which offers more flexibilty and clarity of purpose.
Additionally, the read<> and get<> forms should generally be used
instead anyhow.
DOC: document topo sources inputs in doxygen format
ENH: check for excess tokens in dictionary input (issue #762)
- various bits of code cleanup (modernization) in meshTool/sets.
- relocate some standard functionality to TimePaths to allow a lighter
means of managing time directories without using the entire Time
mechanism.
- optional enableLibs for Time construction (default is on)
and a corresponding argList::noLibs() and "-no-libs" option
STYLE:
- mark Time::outputTime() as deprecated MAY-2016
- use pre-increment for runTime, although there is no difference in
behaviour or performance.
- some paraview versions (eg, on windows) don't support float, only double.
This mostly affected the vtkSurfaceWriter.
The foamToVTK is also affected, but since it also supports the XML
output formats (vtp, vtu) these can be used instead.
- the dictionary-driven variant of stitchMesh allows sequential
application of 'stitch' operation with requiring intermediate
writing to disk.
- Without arguments:
* stitchMesh uses a system/stitchMeshDict or -dict dict
- With arguments:
* master/slave patches specified on the command-line as in previous
versions.
- constructor for empty cell/face/point Zones, with contents to be
transferred in later.
- ZoneMesh::operator(const word&) to return existing zone or a new empty one.
- this provides a better typesafe means of locating predefined cell
models than relying on strings. The lookup is now ptr() or ref()
directly. The lookup functions behave like on-demand singletons when
loading "etc/cellModels".
Functionality is now located entirely in cellModel but a forwarding
version of cellModeller is provided for API (but not ABI) compatibility
with older existing user code.
STYLE: use constexpr for cellMatcher constants
- Since 'bool' and 'Switch' use the _identical_ input mechanism
(ie, both accept true/false, on/off, yes/no, none, 1/0), the main
reason to prefer one or the other is the output.
The output for Switch is as text (eg, "true"), whereas for bool
it is label (0 or 1). If the output is required for a dictionary,
Switch may be appropriate. If the output is not required, or is only
used for Pstream exchange, bool can be more appropriate.
