Pstream: added maxCommsSize setting to do (unstructured) parallel transfers in blocks.
Tested:
- with maxCommsSize 0 produces exactly same result as plus.develop
- compiles with label64
- with maxCommsSize e.g. 3 produces exactly same result as plus.develop
- with maxCommsSize=0 exactly the same messages (with Pstream::debug = 1) as plus.develop
See merge request !85
- provides support for manipulating polyMesh/boundary
- changed behaviour of disableFunctionEntries option to preserve
#include
- dictionary: added reading of lists of dictionaries.
+ each list element may be accessed using the 'entryDDD' keyword
according to their list index.
Patch contributed by Mattijs Janssens
cellZones and pointZones can now be created in one action without the
need to first create a cellSet or pointSet and converting that to the
corresponding zone, e.g.
actions
(
// Example: create cellZone from a box region
{
name c0;
type cellZoneSet;
action new;
source boxToCell;
sourceInfo
{
box (0.04 0 0)(0.06 100 100);
}
}
);
- identical code was present in surfaceCheck (original source),
and isoSurface, isoSurfaceCell (copies).
- add in a MeshedSurface<face> variant as well, since this will likely
be needed in the near future
- these directories are sometimes used for a central, non-thirdparty, non-system
installation
- leave gmp and mpfr as is, since it is not clear how these would interact with system
versions
- only occurs in combination with distributedTriSurfaceMesh in snappy.
- workaround similar to that previously used for surfaceRedistributePar
(issue #60).
Minor adjustment of incompressible motorBike tutorial to detect use of
distributedTriSurfaceMesh.
- there was a slight mix of MUST_READ and MUST_READ_IF_MODIFIED
but with no obvious code to handle runtime modified values
of the decomposition, or how this works with alternative
dictionaries.
- in specific cases it can be useful to suppress searching the instances.
For example, if one only wishes to check if a "points" is available at
the given time instance, without searching backwards through all
times.
- A special purpose MeshedSurface that exposes the stored values
for direct modification.
- Its usage should be restricted to special cases where the surface
needs modifications as an atomic operation.
On 64-bit systems, the system installations of boost, cgal are under
lib64/. The behaviour for a ThirdParty build is mostly lib/ but this
can also be changing.
Boost 1_62_0 and older build into 'lib/'.
CGAL-4.9 builds into 'lib64/', older versions into 'lib/'.
Future-proof things by using lib$WM_COMPILER_LIB_ARCH for boost and
cgal build rules, and forcing these as build targets in the ThirdParty
makeCGAL as well.
--
STYLE: check for boost/version.hpp, CGAL/version.h instead their directories
- manifest in some parallel operations.
STYLE: update foamToEnsight, foamToEnsightParts to use C++ initializer_list
- avoid warning message when removing a non-existent directory (ensight output).
- Cleanup/centralize handling of -decomposeParDict by relocating
common code into argList. Ensures that all processes receive
identical information about the -decomposeParDict opton.
- Only use alternative decomposeParDict for simpleFoam/motorBike
tutorial so that this will be included in the test loop for snappy.
- Added Mattijs' fix for surfaceRedistributePar.
* MeshedSurface / surfMesh / triSurface
- use shorter method names similar to those from volume meshes:
Sf(), magSf(), Cf()
instead of the longer ones from PrimitivePatch:
faceAreas(), magFaceAreas(), faceCentres()
- similar names throughout to ease switching between triSurface and
MeshedSurface storage.
- Write differences with respect to the specified dictionary
(or sub entry if -entry specified)
- Write the differences with respect to a template dictionary:
foamDictionary 0/U -diff $FOAM_ETC/templates/closedVolume/0/U
- Write the differences in boundaryField with respect to a
template dictionary:
foamDictionary 0/U -diff $FOAM_ETC/templates/closedVolume/0/U \
-entry boundaryField
Patch contributed by Mattijs Janssens
- Place common code under OSspecific.
By including "endian.H", either one of WM_BIG_ENDIAN or WM_LITTLE_ENDIAN
will be defined.
Provides inline 32-bit and 64-bit byte swap routines that can be
used/re-used elsewhere.
The inplace memory swaps currently used by the VTK output are left for
the moment pending further cleanup of that code.
For example, to mesh a sphere with a single block the geometry is defined in the
blockMeshDict as a searchableSurface:
geometry
{
sphere
{
type searchableSphere;
centre (0 0 0);
radius 1;
}
}
The vertices, block topology and curved edges are defined in the usual
way, for example
v 0.5773502;
mv -0.5773502;
a 0.7071067;
ma -0.7071067;
vertices
(
($mv $mv $mv)
( $v $mv $mv)
( $v $v $mv)
($mv $v $mv)
($mv $mv $v)
( $v $mv $v)
( $v $v $v)
($mv $v $v)
);
blocks
(
hex (0 1 2 3 4 5 6 7) (10 10 10) simpleGrading (1 1 1)
);
edges
(
arc 0 1 (0 $ma $ma)
arc 2 3 (0 $a $ma)
arc 6 7 (0 $a $a)
arc 4 5 (0 $ma $a)
arc 0 3 ($ma 0 $ma)
arc 1 2 ($a 0 $ma)
arc 5 6 ($a 0 $a)
arc 4 7 ($ma 0 $a)
arc 0 4 ($ma $ma 0)
arc 1 5 ($a $ma 0)
arc 2 6 ($a $a 0)
arc 3 7 ($ma $a 0)
);
which will produce a mesh in which the block edges conform to the sphere
but the faces of the block lie somewhere between the original cube and
the spherical surface which is a consequence of the edge-based
transfinite interpolation.
Now the projection of the block faces to the geometry specified above
can also be specified:
faces
(
project (0 4 7 3) sphere
project (2 6 5 1) sphere
project (1 5 4 0) sphere
project (3 7 6 2) sphere
project (0 3 2 1) sphere
project (4 5 6 7) sphere
);
which produces a mesh that actually conforms to the sphere.
See OpenFOAM-dev/tutorials/mesh/blockMesh/sphere
This functionality is experimental and will undergo further development
and generalization in the future to support more complex surfaces,
feature edge specification and extraction etc. Please get involved if
you would like to see blockMesh become a more flexible block-structured
mesher.
Henry G. Weller, CFD Direct.
- Use ensightCase for case writing.
Rebase ensightPartCells/ensightPartFaces on
ensightCells/ensightFaces routines.
- Greatly reduces code duplication potential source of errors.
- eliminate ensightAsciiStream, ensightBinaryStream, ensightStream in
favour of using ensightFile and ensightGeoFile classes throughout.
- encapsulate mesh-parts sorting with the ensightCells, ensightFaces
class.
- handle of patches/faceZones entirely within ensightMesh for a lighter
interaction with field output. Both faceZones and point fields need
more testing to see if they behave properly for all cases.
- move some output functionality into its own namespace
'ensightOutput', move into a library.
- use the ensightCase class to open new ensight output streams
in the proper sub-directory locations.
- CGAL itself includes its library dependencies, we only need to
provide the -L... option to the proper ThirdParty locations.
Should help improve general build robustness.
- instead we use the CGAL settings directly since they have the
same option of (version | system | none)
- may wish to review this again in the future.
blockMesh -help
Usage: blockMesh [OPTIONS]
options:
-blockTopology write block edges and centres as .obj files
-case <dir> specify alternate case directory, default is the cwd
-dict <file> specify alternative dictionary for the blockMesh description
-noFunctionObjects
do not execute functionObjects
-region <name> specify alternative mesh region
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
Block description
For a given block, the correspondence between the ordering of
vertex labels and face labels is shown below.
For vertex numbering in the sequence 0 to 7 (block, centre):
faces 0 (f0) and 1 are left and right, respectively;
faces 2 and 3 are bottom and top;
and faces 4 and 5 are front the back:
4 ---- 5
f3 |\ |\ f5
| | 7 ---- 6 \
| 0 |--- 1 | \
| \| \| f4
f2 3 ---- 2
f0 ----- f1
Using: OpenFOAM-dev (see www.OpenFOAM.org)
Build: dev-dc59c63351e7
- Less looping when detecting lagrangian clouds and their fields.
- Avoid using Time::setTime() and IOobjectList in tight loops.
They both kill performance immensely.
ENH: provide a -noLagrangian option to foamToEnsight and foamToEnsightParts
for even more control.
- The new field needs initialization with a dimensioned<Type> not just
the dimensionSet.
- The new field was also incorrectly being registered, which could
cause issues later.
Old code:
Found 10990 time steps
Search for moving mesh ... no moving mesh detected.
Startup in 329.09 s
Updated:
Found 10990 time steps
Search for moving mesh ... no moving mesh detected.
Startup in 1.6 s
- Cause was checking "polyMesh/points" via an IOobject.
Short-circuit with a check for a polyMesh/ directory first.
Limit the check to the master-node as well to further reduce
load on the file-system.
------------------------------
ENH: improve per-step conversion times for foamToEnsight.
Old code:
Converting 11001 time steps
Time [0] = 0 Wrote in 1.53 s
Time [1] = 1 Wrote in 1.52 s
...
Time [100] = 100 Elapsed time 205.35 s
Updated:
Converting 11001 time steps
Time [0] = 0 Wrote in 1.4 s
Time [1] = 1 Wrote in 0.07 s
...
Time [100] = 100 Elapsed time 42.4 s
- Speedup by hashing test results from the first conversion step
instead of checking each time.
Check data on all nodes to avoid problems with incomplete writes.
------------------------------
BUG: moving mesh detection failed for foamToEnsightParts
- adjusted to agree with updated foamToEnsight
------------------------------
Note:
- foamToEnsightParts (serial) still has about twice the throughput of
foamToEnsight.
