- manifest in some parallel operations.
STYLE: update foamToEnsight, foamToEnsightParts to use C++ initializer_list
- avoid warning message when removing a non-existent directory (ensight output).
- Cleanup/centralize handling of -decomposeParDict by relocating
common code into argList. Ensures that all processes receive
identical information about the -decomposeParDict opton.
- Only use alternative decomposeParDict for simpleFoam/motorBike
tutorial so that this will be included in the test loop for snappy.
- Added Mattijs' fix for surfaceRedistributePar.
* MeshedSurface / surfMesh / triSurface
- use shorter method names similar to those from volume meshes:
Sf(), magSf(), Cf()
instead of the longer ones from PrimitivePatch:
faceAreas(), magFaceAreas(), faceCentres()
- similar names throughout to ease switching between triSurface and
MeshedSurface storage.
- Write differences with respect to the specified dictionary
(or sub entry if -entry specified)
- Write the differences with respect to a template dictionary:
foamDictionary 0/U -diff $FOAM_ETC/templates/closedVolume/0/U
- Write the differences in boundaryField with respect to a
template dictionary:
foamDictionary 0/U -diff $FOAM_ETC/templates/closedVolume/0/U \
-entry boundaryField
Patch contributed by Mattijs Janssens
- Place common code under OSspecific.
By including "endian.H", either one of WM_BIG_ENDIAN or WM_LITTLE_ENDIAN
will be defined.
Provides inline 32-bit and 64-bit byte swap routines that can be
used/re-used elsewhere.
The inplace memory swaps currently used by the VTK output are left for
the moment pending further cleanup of that code.
For example, to mesh a sphere with a single block the geometry is defined in the
blockMeshDict as a searchableSurface:
geometry
{
sphere
{
type searchableSphere;
centre (0 0 0);
radius 1;
}
}
The vertices, block topology and curved edges are defined in the usual
way, for example
v 0.5773502;
mv -0.5773502;
a 0.7071067;
ma -0.7071067;
vertices
(
($mv $mv $mv)
( $v $mv $mv)
( $v $v $mv)
($mv $v $mv)
($mv $mv $v)
( $v $mv $v)
( $v $v $v)
($mv $v $v)
);
blocks
(
hex (0 1 2 3 4 5 6 7) (10 10 10) simpleGrading (1 1 1)
);
edges
(
arc 0 1 (0 $ma $ma)
arc 2 3 (0 $a $ma)
arc 6 7 (0 $a $a)
arc 4 5 (0 $ma $a)
arc 0 3 ($ma 0 $ma)
arc 1 2 ($a 0 $ma)
arc 5 6 ($a 0 $a)
arc 4 7 ($ma 0 $a)
arc 0 4 ($ma $ma 0)
arc 1 5 ($a $ma 0)
arc 2 6 ($a $a 0)
arc 3 7 ($ma $a 0)
);
which will produce a mesh in which the block edges conform to the sphere
but the faces of the block lie somewhere between the original cube and
the spherical surface which is a consequence of the edge-based
transfinite interpolation.
Now the projection of the block faces to the geometry specified above
can also be specified:
faces
(
project (0 4 7 3) sphere
project (2 6 5 1) sphere
project (1 5 4 0) sphere
project (3 7 6 2) sphere
project (0 3 2 1) sphere
project (4 5 6 7) sphere
);
which produces a mesh that actually conforms to the sphere.
See OpenFOAM-dev/tutorials/mesh/blockMesh/sphere
This functionality is experimental and will undergo further development
and generalization in the future to support more complex surfaces,
feature edge specification and extraction etc. Please get involved if
you would like to see blockMesh become a more flexible block-structured
mesher.
Henry G. Weller, CFD Direct.
- Use ensightCase for case writing.
Rebase ensightPartCells/ensightPartFaces on
ensightCells/ensightFaces routines.
- Greatly reduces code duplication potential source of errors.
- eliminate ensightAsciiStream, ensightBinaryStream, ensightStream in
favour of using ensightFile and ensightGeoFile classes throughout.
- encapsulate mesh-parts sorting with the ensightCells, ensightFaces
class.
- handle of patches/faceZones entirely within ensightMesh for a lighter
interaction with field output. Both faceZones and point fields need
more testing to see if they behave properly for all cases.
- move some output functionality into its own namespace
'ensightOutput', move into a library.
- use the ensightCase class to open new ensight output streams
in the proper sub-directory locations.
- CGAL itself includes its library dependencies, we only need to
provide the -L... option to the proper ThirdParty locations.
Should help improve general build robustness.
- instead we use the CGAL settings directly since they have the
same option of (version | system | none)
- may wish to review this again in the future.
blockMesh -help
Usage: blockMesh [OPTIONS]
options:
-blockTopology write block edges and centres as .obj files
-case <dir> specify alternate case directory, default is the cwd
-dict <file> specify alternative dictionary for the blockMesh description
-noFunctionObjects
do not execute functionObjects
-region <name> specify alternative mesh region
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
Block description
For a given block, the correspondence between the ordering of
vertex labels and face labels is shown below.
For vertex numbering in the sequence 0 to 7 (block, centre):
faces 0 (f0) and 1 are left and right, respectively;
faces 2 and 3 are bottom and top;
and faces 4 and 5 are front the back:
4 ---- 5
f3 |\ |\ f5
| | 7 ---- 6 \
| 0 |--- 1 | \
| \| \| f4
f2 3 ---- 2
f0 ----- f1
Using: OpenFOAM-dev (see www.OpenFOAM.org)
Build: dev-dc59c63351e7
- Less looping when detecting lagrangian clouds and their fields.
- Avoid using Time::setTime() and IOobjectList in tight loops.
They both kill performance immensely.
ENH: provide a -noLagrangian option to foamToEnsight and foamToEnsightParts
for even more control.
- The new field needs initialization with a dimensioned<Type> not just
the dimensionSet.
- The new field was also incorrectly being registered, which could
cause issues later.
Old code:
Found 10990 time steps
Search for moving mesh ... no moving mesh detected.
Startup in 329.09 s
Updated:
Found 10990 time steps
Search for moving mesh ... no moving mesh detected.
Startup in 1.6 s
- Cause was checking "polyMesh/points" via an IOobject.
Short-circuit with a check for a polyMesh/ directory first.
Limit the check to the master-node as well to further reduce
load on the file-system.
------------------------------
ENH: improve per-step conversion times for foamToEnsight.
Old code:
Converting 11001 time steps
Time [0] = 0 Wrote in 1.53 s
Time [1] = 1 Wrote in 1.52 s
...
Time [100] = 100 Elapsed time 205.35 s
Updated:
Converting 11001 time steps
Time [0] = 0 Wrote in 1.4 s
Time [1] = 1 Wrote in 0.07 s
...
Time [100] = 100 Elapsed time 42.4 s
- Speedup by hashing test results from the first conversion step
instead of checking each time.
Check data on all nodes to avoid problems with incomplete writes.
------------------------------
BUG: moving mesh detection failed for foamToEnsightParts
- adjusted to agree with updated foamToEnsight
------------------------------
Note:
- foamToEnsightParts (serial) still has about twice the throughput of
foamToEnsight.
- Default is a width of 8 characters, but this can be extended up to 31
characters via the '-width' command-line option.
- Now use a similar structure as foamToEnsightParts for the masking.
This reduces the clutter within the directory, makes it easier to
selectively delete some time steps (using shell commands).
- Added in a "time" information data in each sub-directory to
make it possible to reconstruct the case file with an external
script.
- Conversion of cloud data should now also work in parallel
(may need more testing).
- Support binary output for cloud data.
- Better avoidance of illegal ensight variable names.
But still partially incomplete (due to patch fields).
==================================================
Example of NEW file structure:
EnSight/verticalChannel.case # case name
EnSight/geometry # for non-moving geometry
EnSight/data/ # time-varying data
EnSight/data/00000000/
EnSight/data/00000001/
...
Fields are stored by name within the data/********/ directories:
EnSight/data/00000001/time # human-readable time info
EnSight/data/00000001/U
EnSight/data/00000001/p
...
EnSight/data/00000001/geometry # for moving geometry
Clouds are stored at the next sub-directory level:
EnSight/data/00000001/lagrangian/<cloudName>/positions
EnSight/data/00000001/lagrangian/<cloudName>/U
...
==================================================
The old structure was significantly more cluttered:
EnSight/verticalChannel.case
EnSight/verticalChannel.0000.mesh
EnSight/verticalChannel.0001.p
EnSight/verticalChannel.0001.<cloudName>
EnSight/verticalChannel.0001.<cloudName>.U
==================================================
- There will be triangles rendered inside the mesh (when
surface-rendering), because one of the cell's triangles is defined
as a quadrangle in VTK_WEDGE.
- Therefore, this VTK_WEDGE representation is only used when
decomposing the mesh, otherwise the correct representation is done
by VTK_POLYHEDRON.
- Furthermore, using VTK_PYRAMID gave worse result, because it renders
2 triangles inside the mesh for the collapsed quadrangle, likely due
to mismatch with the adjacent cell's face.
- Using VTK_HEXAHEDRON was not tested in this iteration, given that it
should give even worse results, when compared to using VTK_PYRAMID.
Patch contributed by Bruno Santos
Resolves bug-report http://bugs.openfoam.org/view.php?id=2099
- Cannot test if these older reader modules actually build,
owning largely to build issues since with paraview 3.14 (Feb 2012)
and paraview 3.98 (Dec 2012) themselves.
Note: classes are prefixed with 'foamVtk' instead of 'vtk' to avoid potential
conflicts with VTK itself.
foamVtkCore
~~~~~~~~~~~
- General very low-level functionality.
foamVtkPTraits
~~~~~~~~~~~~~~
- Traits type of functionality for VTK
foamVtkOutputOptions
~~~~~~~~~~~~~~~~~~~~
- The various format output options as a class that can be passed to
formatters etc.
foamVtkCells
~~~~~~~~~~~~
- Intended for unifying vtkTopo and PV-Reader code in the future.
- Handles polyhedron decompose internally etc
foamVtkOutput, foamVtkFormatter
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Output helpers.
- Selector for individual formatters.
Currently write all scalar data a 'float' (not 'double'). Can
revisit this in the future.
Now the functionality to write single graph files or log files (vs time)
may be used in the creation of any form of functionObject, not just
those relating to a mesh region.
- Allows passing of additional information (per-face zone ids) or possibly
other things, while reducing the number of arguments to pass.
- In sampledTriSurfaceMesh, preserve the region information that was
read in, passing it onwards via the UnsortedMeshSurface content.
The Nastran surface writer is currently the only writer making use
of this per-face zone information.
Passing it through as a PSHELL attribute, which should retain the
distinction for parts. (issue #204)
- use surfFaces() to return the templated list of faces.
This frees up the method 'faces()' to be used as a virtual method,
which will be needed at a later stage.
- the checking for point-connected multiple-regions now also writes the
conflicting points to a pointSet
- with the -writeSets option it now also reconstructs & writes pointSets
- patchFields now get mapped (instead of created)
- with -consistent it now maps all patches except for processor ones (they are
the only ones that are processor-local)
- all constraint patches get evaluated after mapping to bring them up to date.
Patch contributed by Mattijs Janssens
Added the option '-subDict' to specify a sub-dictionary if multiple
replacement sets are present in the same file. This also provides
backward compatibility by setting '-subDict dictionaryReplacement'
Usage: foamList [OPTIONS]
options:
-case <dir> specify alternate case directory, default is the cwd
-compressibleTurbulenceModels
List compressible turbulenceModels
-functionObjects List functionObjects
-fvOptions List fvOptions
-incompressibleTurbulenceModels
List incompressible turbulenceModels
-noFunctionObjects
do not execute functionObjects
-registeredSwitches
List switches registered for run-time modification
-scalarBCs List scalar field boundary conditions (fvPatchField<scalar>)
-switches List switches declared in libraries but not set in
etc/controlDict
-unset List switches declared in libraries but not set in
etc/controlDict
-vectorBCs List vector field boundary conditions (fvPatchField<vector>)
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
Usage: foamList [OPTIONS]
options:
-case <dir> specify alternate case directory, default is the cwd
-compressibleTurbulenceModels
List compressible turbulenceModels
-functionObjects List functionObjects
-fvOptions List fvOptions
-incompressibleTurbulenceModels
List incompressible turbulenceModels
-noFunctionObjects
do not execute functionObjects
-registeredSwitches
List switches registered for run-time modification
-switches List switches declared in libraries but not set in
etc/controlDict
-unset List switches declared in libraries but not set in
etc/controlDict
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
To re-use existing 'sampleDict' files simply add the following entries:
type sets;
libs ("libsampling.so");
and run
postProcess -func sampleDict
It is probably better to also rename 'sampleDict' -> 'sample' and then run
postProcess -func sampleDict
Replaced the 'postProcess' argument to the 'write' and 'execute'
functions with the single static member 'postProcess' in the
functionObject base-class.
In parallel the sets are reconstructed. e.g.
mpirun -np 6 checkMesh -parallel -allGeometry -allTopology -writeSets vtk
will create a postProcessing/ folder with the vtk files of the
(reconstructed) faceSets and cellSets.
Also improved analysis of disconnected regions now also checks for point
connectivity with is useful for detecting if AMI regions have duplicate
points.
Patch contributed by Mattijs Janssens
Replaces the dictionary access functionality of foamInfoExec and
provides additional options to edit individual entries.
Contributed by Mattijs Janssens
The normal library system() command uses 'fork', which causes
problems on IB+OPENMPI.
STYLE: add Foam:: qualifier to system calls to make them easier to spot.
- remove old VTK_CONVEX_POINT_SET code, since VTK_POLYHEDRON exists
since several years
ENH: improve robustness of paraFoam script
- only check the relevant plugin types,
fallback to native reader if needed/possible.
